16 Cégek a következőhöz ✓ B2B gyártók, kereskedők és beszállítók az 4 országokból ✓ Különleges szolgáltatással gyors információért és árakért ✓
Keresés az alábbiak szerint:
61184 Karben, Németország UNIFLEX-Hydraulik GmbH Gyártó ✓ Szolgáltató ✓
Cégünkről
Tovább olvas In 1972, the machine builder and graduate engineer Peter Schröck established Uniflex-Hydraulik GmbH in Frankfurt/Main. Owing to pioneering innovations and extraordinary product quality, the flourishing enterprise soon developed into a global provider of machines for hose production.
Uniflex-Hydraulik GmbH became a member of Freiherren Waitz group in 1992. This laid the foundation for further growth: in 1996, the company occupied a new, larger office and production building in Karben, 10 km north of Frankfurt.
The subsidiary UNIFLEX of America LLC. with its present registered office in Schaumburg near Chicago, Illinois, was established in 1998 to support the markets in the Americas. In June 2004, UNIFLEX opened a subsidiary in Singapore from where our Asia-Pacific customers are served. We are also represented by offices in Tangerang/Indonesia and Shanghai/China since 2007 and 2009, respectively.
Today, after 40 years, UNIFLEX is a system provider in hose production – from workshop equipment to production plants. Innovative and reliable as well as durable hose crimpers, cutting machines, pin prick tools, skiving machines, marking tools, test systems, software and cleaning machines have been and are being developed and marketed in close cooperation with leading hose manufacturers and users.
Uniflex-Hydraulik GmbH became a member of Freiherren Waitz group in 1992. This laid the foundation for further growth: in 1996, the company occupied a new, larger office and production building in Karben, 10 km north of Frankfurt.
The subsidiary UNIFLEX of America LLC. with its present registered office in Schaumburg near Chicago, Illinois, was established in 1998 to support the markets in the Americas. In June 2004, UNIFLEX opened a subsidiary in Singapore from where our Asia-Pacific customers are served. We are also represented by offices in Tangerang/Indonesia and Shanghai/China since 2007 and 2009, respectively.
Today, after 40 years, UNIFLEX is a system provider in hose production – from workshop equipment to production plants. Innovative and reliable as well as durable hose crimpers, cutting machines, pin prick tools, skiving machines, marking tools, test systems, software and cleaning machines have been and are being developed and marketed in close cooperation with leading hose manufacturers and users.
73463 Westhausen, Németország ATIS Gesellschaft für innovative Messtechnik mbH Kereskedő ✓ Szolgáltató ✓
Cégprofilok Üzenetküldés
- Kalibráló szolgáltatások | Kalibrálás
86159 Augsburg, Németország BOMETRIC Industrielle Messtechnik GmbH & Co. KG Szolgáltató ✓
Cégprofilok Üzenetküldés
- Kalibráló oldatok | Kalibráló szolgáltatások | Kalibrálás
Cégünkről
Tovább olvas HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
65510 Idstein / Taunus, Németország innomatec Mess- und Schnellanschluss-Systeme GmbH Gyártó ✓ Kereskedő ✓ Beszállító ✓ Szolgáltató ✓
Cégprofilok Üzenetküldés
- Kalibráló berendezés | Kalibráló szolgáltatások | Kalibrálás
- Kalibráló oldatok | Kalibráló rendszerek | Kalibráló szolgáltatások
- Kalibráló szolgáltatások | Kalibrálás
Cégünkről
Tovább olvas Az OPTICS11 egy gyorsan növekvő csúcstechnológiai vállalat, amely Amszterdamban található, és páratlan teljesítményt nyújt a legfejlettebb optikai szálas érzékelő rendszerek számára. Termékeinket világszerte különböző piacokon kínáljuk, mint például a strukturális állapotfelmérés, az állapotfigyelés, az energia, a kutatás és fejlesztés, a vasút, a honvédelem és így tovább. Az optikai szálérzékelés felülmúlja a klasszikus elektromos technológiákat egy kihívást jelentő munkakörnyezetben, például erős elektromos vagy mágneses térben, nagy sugárzásban, szélsőséges hőmérsékleten vagy folyadékban. Megoldásaink célja a kritikus szerkezeti hibák korai jeleinek felderítése és nyomon követése, valamint az eszköztulajdonosok pontos és megbízható adatainak biztosítása.
Küldetésünk, hogy tökéletes optikai szálas érzékelő rendszert biztosítsunk, amely magas színvonalú kritikus információkat nyújt a rendszerintegrátoroknak új területek megnyitására és az ipar megváltoztatására. Új lehetőségeket tárunk fel az Optics11 szálakra, és elkötelezettek vagyunk, hogy továbbra is innovatívabb megoldásokat hozzunk létre az ipar megzavarására.
Küldetésünk, hogy tökéletes optikai szálas érzékelő rendszert biztosítsunk, amely magas színvonalú kritikus információkat nyújt a rendszerintegrátoroknak új területek megnyitására és az ipar megváltoztatására. Új lehetőségeket tárunk fel az Optics11 szálakra, és elkötelezettek vagyunk, hogy továbbra is innovatívabb megoldásokat hozzunk létre az ipar megzavarására.
48712 Gescher, Németország sigma3D GmbH Gyártó ✓ Kereskedő ✓ Beszállító ✓ Szolgáltató ✓
Cégprofilok Üzenetküldés
- Gépkalibrálás
44866 Bochum, Németország Status Pro Maschinenmesstechnik GmbH Gyártó ✓ Kereskedő ✓ Beszállító ✓
Cégprofilok Üzenetküldés
- Kalibráló berendezés | Kalibráló készülékek | Kalibráló oldatok
- Kalibráló oldatok | Gépkalibrálás | Kalibráló szolgáltatások
- Kalibráló berendezés | Kalibráló készülékek | Kalibráló laboratóriumok
Cégünkről
Wir sind Ihr führendes Dienstleistungsunternehmen für Qualitätssicherung und Experten in den Bereichen Kalibrierung, Prüfmittelmanagement, Qualifizierung und Validierung. Mehr Service, mehr Sicherheit für Ihr Unternehmen.
Automated Precision Europe GmbH Gyártó ✓ Kereskedő ✓ Beszállító ✓ Szolgáltató ✓
- API termékkatalógus - Az iscover frissített verziója, a 2022-es termék- és tartozékkatalógusunk naprakész. Ismerje meg mérési rend...
- API Radian Plus - PLUS provides extended CORE tracker functionality with hand-held tactile & laser scanning probes and offers 6DOF...
- API Radian Pro - A ProIFM/ADM tracker páratlan pontossággal és átfogó képességekkel rendelkezik, beleértve az automatikus 6-DOF kö...
- API Radian Core - A CORE gazdaságos SMR nyomkövetési képességeket biztosít az 50M és 80M ADM modellekben, referencia pontossággal.
- XD-Laser - Az XD lézer az egyetlen olyan értékelési rendszer, amely egyszerre mérheti mind a hat hibaparamétert egy eszközben.
- SwivelCheck - Kiváló független rendszer a forgó és forgó tengelyek vízszintes és függőleges helyzetének mérésére.
Cégünkről
The IDS Innomic GmbH consists of a hand-picked team in the field of physics, electro-technics and business. Together, we work focused on the field of vibration measurement.
For our customers we are active during the entire process chain - from development to production, consulting and sales up to the downstream service.
For our customers we are active during the entire process chain - from development to production, consulting and sales up to the downstream service.