Rögzítéstechnika  Gyártók, Kereskedők, Beszállítók

With over 60,000 readily available products, Ganter is the Number One specialist in standard parts.
Handles, hinges, handwheels, clamp handles, knobs or clamping devices - all these are components which are needed virtually everywhere, in mechanical engineering as much as in laboratories, in plant equipment and in the transport sector. Components, many of which come from the Black Forest, directly off the high-rise shelves of the market leader: Otto Ganter GmbH & Co. KG.
Established in Furtwangen in 1894 as a small mechanical workshop, company founder Otto Ganter hit on the idea in 1912 to standardize operating elements - years before the German Industry Norm (DIN) came into being. An idea thriving and growing into a sustained model of success: today, the family-owned company in its fourth generation is present worldwide and keeps on growing. Over 400 people at the company‘s Black Forest headquarters permanently develop new elements, manufacture with ultimate precision and quality and ensure the fastest possible shipping. 85 percent of all orders leave our plant within 24 hours - a speed which sets standards. And with over 60,000 available variants, Ganter offers an unrivalled range and variety of standard parts.
What became known as the Ganter Standard after its launch 100 years ago eventually turned into an indispensable feature in many engineering and construction offices - and with it the Ganter catalogue, showing the entire range of products with all their characteristics on around 1,900 pages in the most recent 17th edition. The Ganter catalogue has long been a much sought-after manual which has successfully helped and accompanied generations of designers and developers. And - this being the digital age - all the data are also available online and can be loaded into all common CAD programs.
If, by any chance, there is a standard part that you need and cannot find in the extensive range of products, the people at Ganter will set to work to close the gap and develop a customized solution. This is also one part of the story which has made Ganter into what it is today: a successful player on the international stage.

More than 50,000 products. DV-supported stock-keeping. Special parts produced on order.
Our portfolio is already vast with its more than 50,000 standard fasteners- good to know that our online catalogue and our employees‘ know-how keep the overview. But since norms cannot meet all requirements, our programme of products goes beyond DIN data sheets and factory recommendations: special productions according to drawings- from the special type of screws to the plate bending part- complete our offer. We have our own innovations in our programme of products as well. One of our specialties are magnetic plug systems.
They collect the abrasion in gearbox cases or serve as a specially constructed fuel level plunger in wind power stations. In addition we have been involved in further developments of suspension arrangements in the field of mining and tunnel construction. Besides we offer extended screws for which there was a special annex to the DIN norms for the open line construction. A cleverly devised and software-supported stock-keeping and assignment sale make sure that our products are also delivered to you as soon as possible and in a perfectly compiled manner.

A logó telepítési és szerelési tartozékainak széles választékát kínáljuk.
A szállítási tervünk "logó rögzítése" különböző méretű és formájú fali távtartókhoz, mennyezeti rögzítőelemekhez, kötélrendszerekhez, távtartókhoz, panelekhez, díszítő burkolatokhoz és csavarokhoz tartozik!
A logó kötőelemek sorozata hangsúlyozza a gyors szállítást, az illetékes ügyfélszolgálatot-még a vásárlás után is-először is alacsony áron!
Nézze meg az általunk kínált telepítési lehetőségeket-ha nem találja meg a megfelelő telepítési rendszert a logójához, vagy bármilyen kérdése van-csak hívjon minket-örömmel segítünk Önnek személyesen.
A tiéd Jel-kutatás Csapat

HEICO-LOCK® Wedge Locking SystemsHigh quality anti-vibration security for most demanding of bolted joint application

• Certified system for securing bolts, working at low and high preload levels
• Particularly suitable for dynamic loads – including when using lubricants
• Can be re-used
• Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)
• Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts
• Available in steel or stainless steel with narrow or wide bearing surfaces – other materials are available upon request

HEICO-LOCK® Wedge Lock Washers
HEICO-LOCK® Ring Lock Washers
HEICO-LOCK® Wedge Lock Nutes
HEICO-LOCK® Wheel Nuts
HEICO-LOCK® Reaction Washers >>NEW

The Görlitzer Hanf & Drahtseilerei was founded in 1836.
For generations our motto has been ‘Service to customers’. A new company has been created on approx. 4,000 square metres which meets all modern requirements. Since 1996 we have been certified in accordance to ISO 9001 and we belong to the FSA [Professional Association for Ropes and Slings] as well as to the Federal Association of Rope, Net and Sail Makers. This expertise connected with regular training of our staff guarantee that you will be advised professionally and provided with quality service.
• We splice steel ropes up to 54 mm
• We manufacture steel ropes in all sizes
• We produce cords in all thicknesses
• We inspect and maintain all lifting devices and load suspension devices
• We tear and test thoroughly, up to 400 kN, on our testing machines
• We manufacture and produce using traditional methods of rope splicing
• We have been training apprentices since 1950

BTS Befestigungselemente-Technik GmbH
is a medium-sized company in the metalworking industry, focused on the manufacture and sale of fastening and connecting materials. The company was founded in 1983. It is located in Saarburg, on the Beurig industrial estate. A workforce of approximately 50 is employed.
In order to satisfy the increasingly difficult market requirements, at an early stage BTS established an ISO 9001 quality assurance system, which was certified by the TÜV-Rheinland technical inspection authority as early as December 1994. In addition, BTS also has a certified environmental management system according to ISO 14001. Further success factors in maintaining market share include maximum customer orientation and speed of reaction in processing customer orders.

Whether hoses for all applications, couplings, hose clamps, seals, products for odour neutralisation or transport racks, we are guaranteed to find the right one for you from over 75,000 products! Through the successful combination of quality products and services, we enable you to find customised solutions for your requirements.