11 aziende per Tubi del gas a pendolo ✓ Fabbricanti, distributori e fornitori B2B da 1 Paesi ✓ Con servizio speciale per ottenere velocemente prezzi e informazioni ✓
Filtra per:
24558 Henstedt-Ulzburg, Germania Induflex Schlauch und Kompensatoren GmbH Fabbricante ✓
Profilo dell'azienda Invia messaggio
- Tubi del gas a pendolo | Tubi per gas naturale | Tubi di propano
Altre aziende che potrebbero soddisfare la tua ricerca.
03149 Forst (Lausitz), Germania Technischer Handel -Industriebedarf- MROSE GmbH Commerciante ✓ Prestatore di servizi ✓
- Tubi di gas | Flessibili di convogliamento | Flessibili per la chimica
15837 Baruth / Mark, Germania Borrmann Brenner Berlin GmbH Fabbricante ✓ Commerciante ✓
Chi siamo
Continua The company Borrmann Brenner Berlin GmbH was founded in 1949 in Berlin. During the starting years mainly burners for warming up bitumen for small crafts enterprises, in particular the building and roofing trade, were produced.
With the spreading of Liquid gas / Propane as mobile and clean energy source new possibilities within the building industry for the replacement of the up to then usual heating up with coal or combustion of wood resulted.
Business contacts to the Federal Post Office led in the following years to an extension of the production of the product line burner handles for soldering work as well as burners for bitumen digesters to filling joint boxes.
The acquisition of big customers was the defined marketing target. Firm philosophy oriented already very early on innovative products with excellent quality and an intensive customer care. Further customers, like the German Federal Railroads and a number of large companies in the power industry, could also be won by this strategy.
When at the beginning of the seventies the Federal Post Office changed the technology of cable connection, there was no suitable burner set on the market for the handling of the new shrinking hoses.
With one of the Borrmann Brenner Berlin GmbH developed burner novelty this market gap could be closed and the entire Federal Postal Administration equipped.
Since this development also the telecommunications enterprises in Belgium, Switzerland, Austria, Bulgaria, South Africa and a lot of other countries were supplied with these burners. At present the main focus is on the market exploitation in Eastern Europe, in Great Britain and North Africa.
Towards the end of the 70's Borrmann Brenner Berlin GmbH also succeeded in largely filling the market segment of gas burners for road construction machines by actively offering attractive solutions.
In 1994 company headquarters and production were shifted to Baruth / Mark – OT Schöbendorf in Brandenburg, south of Berlin.
Since 1998 the company is certified by DIN-ISO 9001-2000.
The most essential products are:
With the spreading of Liquid gas / Propane as mobile and clean energy source new possibilities within the building industry for the replacement of the up to then usual heating up with coal or combustion of wood resulted.
Business contacts to the Federal Post Office led in the following years to an extension of the production of the product line burner handles for soldering work as well as burners for bitumen digesters to filling joint boxes.
The acquisition of big customers was the defined marketing target. Firm philosophy oriented already very early on innovative products with excellent quality and an intensive customer care. Further customers, like the German Federal Railroads and a number of large companies in the power industry, could also be won by this strategy.
When at the beginning of the seventies the Federal Post Office changed the technology of cable connection, there was no suitable burner set on the market for the handling of the new shrinking hoses.
With one of the Borrmann Brenner Berlin GmbH developed burner novelty this market gap could be closed and the entire Federal Postal Administration equipped.
Since this development also the telecommunications enterprises in Belgium, Switzerland, Austria, Bulgaria, South Africa and a lot of other countries were supplied with these burners. At present the main focus is on the market exploitation in Eastern Europe, in Great Britain and North Africa.
Towards the end of the 70's Borrmann Brenner Berlin GmbH also succeeded in largely filling the market segment of gas burners for road construction machines by actively offering attractive solutions.
In 1994 company headquarters and production were shifted to Baruth / Mark – OT Schöbendorf in Brandenburg, south of Berlin.
Since 1998 the company is certified by DIN-ISO 9001-2000.
The most essential products are:
- Propane tools and burners for cable construction
- Regulating technology and special burners for road building machines
- Burners for other applications and industry
Chi siamo
Whether hoses for all applications, couplings, hose clamps, seals, products for odour neutralisation or transport racks, we are guaranteed to find the right one for you from over 75,000 products! Through the successful combination of quality products and services, we enable you to find customised solutions for your requirements.
35756 Mittenaar-Ballersbach, Germania Haarmann GmbH & Co. KG Fabbricante ✓ Commerciante ✓ Fornitore ✓ Prestatore di servizi ✓
- Tubi di gas | Tubi per gas naturale | Tubi di propano
41468 Neuss, Germania Künneth & Knöchel KG Commerciante ✓
Chi siamo
Continua Künneth & Knöchel was founded in Magdeburg in 1887 and has been manufacturing vulcanizing units for worldwide use.
Every unit is manufactured for a specifi c application. We build units for conveyor belts with fabric or steel cord plies up to a belt width of 3,200 mm. The heating platens and pressure bars we use are made of high-quality special aluminium to give many years of reliable service with a high tensile and bending strength. They are selectively available in the forms rectangular shape or rhombic 16.42°, 22° or 30°.
The electrical heating of the heating platens is realised by flat tube heating elements as well as heating foils. The flat tube heating elements are embedded in stainless steel tubing for protection against rust and moisture. Direct contact of the tubes with the heating platens ensures rapid heating. The heating foils are made of silicone with a temperature resistance up to 220°C. The heat flow is evenly distributed everywhere because the heating foil covers the whole surface.
For rapid cooling, our vulcanizing heating platens are available with optional compressed-air or water cooling system. With the water cooling system the heating platens can be cooled down till 80 °C within 10–15 minutes. The electric controller of our vulcanizing units can be operated alternatively by hand or automatically.
We stock a wide range of spare parts to provide a 24-hour service within Germany. All vulcanizing units are thoroughly tested by qualifi ed specialists prior to delivery, including safety and functional tests according to VDE0100 to ensure the highest standard of quality for our products. Only a perfectly functioning vulcanizing unit ensures a perfectly spliced conveyor belt.
We will be happy to provide a quotation without obligation as well as advice on all aspects of our products.
Every unit is manufactured for a specifi c application. We build units for conveyor belts with fabric or steel cord plies up to a belt width of 3,200 mm. The heating platens and pressure bars we use are made of high-quality special aluminium to give many years of reliable service with a high tensile and bending strength. They are selectively available in the forms rectangular shape or rhombic 16.42°, 22° or 30°.
The electrical heating of the heating platens is realised by flat tube heating elements as well as heating foils. The flat tube heating elements are embedded in stainless steel tubing for protection against rust and moisture. Direct contact of the tubes with the heating platens ensures rapid heating. The heating foils are made of silicone with a temperature resistance up to 220°C. The heat flow is evenly distributed everywhere because the heating foil covers the whole surface.
For rapid cooling, our vulcanizing heating platens are available with optional compressed-air or water cooling system. With the water cooling system the heating platens can be cooled down till 80 °C within 10–15 minutes. The electric controller of our vulcanizing units can be operated alternatively by hand or automatically.
We stock a wide range of spare parts to provide a 24-hour service within Germany. All vulcanizing units are thoroughly tested by qualifi ed specialists prior to delivery, including safety and functional tests according to VDE0100 to ensure the highest standard of quality for our products. Only a perfectly functioning vulcanizing unit ensures a perfectly spliced conveyor belt.
We will be happy to provide a quotation without obligation as well as advice on all aspects of our products.
47138 Duisburg, Germania ISAFLEX GmbH Fabbricante ✓ Commerciante ✓ Fornitore ✓
Profilo dell'azienda Invia messaggio
Chi siamo
Continua Isaflex GmbH, Armaturen und Schlauchtechnik (fittings and hose accessories) is a family-owned business that was founded in 1986 by Messrs. Frankenberg and Meinus.
Our company management always put the reliability and quality of our products front and centre. Our company started doing business in Duisburg.
As we have enjoyed continuous growth, we were able to add four additional locations in Castrop-Rauxel, Frechen, Hilden, and Neuss, where our customers will always find competent experts who can provide them with the expertise and flexible service they require.
Thanks to our long years of experience and the strong ties to our suppliers , our manufacturing and trading company is able to guarantee that the products we make for the segments of mechanical and plant engineering as well as pipeline construction will always reflect a high degree of expertise and work in a reliable fashion.
We also have the right solution for any high-pressure water equipment you may require.
Our company management always put the reliability and quality of our products front and centre. Our company started doing business in Duisburg.
As we have enjoyed continuous growth, we were able to add four additional locations in Castrop-Rauxel, Frechen, Hilden, and Neuss, where our customers will always find competent experts who can provide them with the expertise and flexible service they require.
Thanks to our long years of experience and the strong ties to our suppliers , our manufacturing and trading company is able to guarantee that the products we make for the segments of mechanical and plant engineering as well as pipeline construction will always reflect a high degree of expertise and work in a reliable fashion.
We also have the right solution for any high-pressure water equipment you may require.
76297 Stutensee, Germania BOA Metal Solutions GmbH Fabbricante ✓
Profilo dell'azienda Invia messaggio
Chi siamo
Continua BOA Group è uno dei leader mondiali nella produzione di elementi flessibili meccanici per l'industria automobile e per una vasta gamma d'applicazioni industriali. La sede centrale si trova a Stutensee presso Karlsruhe/ Germania.
BOA Group disegna, fabbrica e vende nel mondo intero componenti in acciaio inossidabile per la gestione motori, sistemi di gas di scarico e sottoprodotti per macchine. Per il settore industria, BOA fornisce elementi flessibili ad alta tenuta per applicazioni nella tecnica energetica e la costruzione d'impianti tecnici, specialmente per veicoli su rotaia, la costruzione di navi, l'aeronautica, la tecnica del vuoto, di misura e di controllo, ma anche per la rubinetteria.
Le soluzioni di BOA Group comprendono sia prodotti standardizzati, sia progettazioni su misura, elaborate individualmente in collaborazione con i nostri clienti.
BOA Group disegna, fabbrica e vende nel mondo intero componenti in acciaio inossidabile per la gestione motori, sistemi di gas di scarico e sottoprodotti per macchine. Per il settore industria, BOA fornisce elementi flessibili ad alta tenuta per applicazioni nella tecnica energetica e la costruzione d'impianti tecnici, specialmente per veicoli su rotaia, la costruzione di navi, l'aeronautica, la tecnica del vuoto, di misura e di controllo, ma anche per la rubinetteria.
Le soluzioni di BOA Group comprendono sia prodotti standardizzati, sia progettazioni su misura, elaborate individualmente in collaborazione con i nostri clienti.
- Tubi di gas | Tubazioni ossigeno | Tubature per gas liquefatto
38820 Halberstadt, Germania NOVOPLAST SCHLAUCHTECHNIK GmbH Prestatore di servizi ✓
Profilo dell'azienda Invia messaggio
- Tubi di gas | Tubi in tessuto | Tubi profilati
- Tubi di gas | Flessibili di protezione | Tubi per aspirazione
Tubi del gas a pendolo - Fabbricanti, Commercianti e Fornitori
Se la tua azienda dispone di poco tempo e ha bisogno di ottenere velocemente prezzi e informazioni su determinati prodotti, compila il modulo per il servizio speciale che trovi nella pagina dei risultati di IndustryStock.
Cercheremo noi il fabbricante, distributore o prestatore di servizi giusto, specialista in Tubi del gas a pendolo, e inoltreremo la tua richiesta direttamente all'azienda in questione.
Sei alla ricerca di Tubi del gas a pendolo per la tua azienda?
il motore di ricerca di prodotti e servizi contiene ancora molti rilevanti argomenti come Tubi del gas a pendolo. In alternativa potete anche cercare altri produttori, venditori, erogatori di servizi o fornitori mentre inserite i seguenti prodotti o servizi nella maschera di ricerca:
Come valuti le informazioni riportate su questa pagina?