9 aziende per Auditing ✓ Fabbricanti, distributori e fornitori B2B da 2 Paesi ✓ Con servizio speciale per ottenere velocemente prezzi e informazioni ✓
Filtra per:
09232 Hartmannsdorf, Germania SLG Prüf- und Zertifizierungs GmbH Prestatore di servizi ✓
Profilo dell'azienda Invia messaggio
- Auditing | Tester | Ispezione
- Auditing | Ispezione | Banchi di controllo
07745 Jena, Germania Günter-Köhler-Institut für Fügetechnik und Werkstoffprüfung GmbH Prestatore di servizi ✓
Profilo dell'azienda Invia messaggio
- Auditing | Tecnologia di verifica delle materie prime | Controllo materiali
Chi siamo
Continua HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
39576 Stendal, Germania ifu GmbH Stendal Privates Institut für Umweltüberwachung Prestatore di servizi ✓
Profilo dell'azienda Invia messaggio
- Auditing | Ispezione | Laboratorio di controllo
71126 Gäufelden, Germania PÜG mbH Dipl.-Ing. Klaus Suhm Fabbricante ✓ Commerciante ✓
Profilo dell'azienda Invia messaggio
- Auditing
65185 Wiesbaden, Germania TPG - Technische Prüfgesellschaft mbH Prestatore di servizi ✓
Profilo dell'azienda Invia messaggio
- Auditing
30938 Burgwedel, Germania VOGT Ultrasonics GmbH Prestatore di servizi ✓
Profilo dell'azienda Invia messaggio
- Auditing | Tester | Dispositivi di controllo materiali
- Auditing | Ispezione | Controllo materiali
Auditing - Fabbricanti, Commercianti e Fornitori
Se la tua azienda dispone di poco tempo e ha bisogno di ottenere velocemente maggiori informazioni e indicazioni di prezzo, non esitare a utilizzare il modulo per il servizio speciale che trovi nella pagina dei risultati.
IndustryStock troverà per la tua azienda i fabbricanti, distributori o fornitori di servizi idonei, specialisti in Auditing, e inoltrerà immediatamente la tua richiesta alle aziende in questione.
Sei alla ricerca di Auditing per la tua azienda?
il motore di ricerca di prodotti e servizi contiene ancora molti rilevanti argomenti come Auditing. In alternativa potete anche cercare altri produttori, venditori, erogatori di servizi o fornitori mentre inserite i seguenti prodotti o servizi nella maschera di ricerca:
Come valuti le informazioni riportate su questa pagina?
8 Recensioni 94%