5 틸트 포어링 장비 관련 회사 ✓ 2의 B2B 제조업체, 판매업체& 공급업체 ✓ 신속하게 내용 및 가격 정보를 검색해주는 특별 서비스 ✓
97892 Kreuzwertheim, 독일 Kurtz Holding GmbH & Co. Beteiligungs KG 제조업체 ✓ 공급업체 ✓ 서비스업체 ✓
당사 소개
내용보기 Kurtz GmbH is a member of the Kurtz Ersa Corporation,an owner-managed, internationally active group of technology and suppliercompanies with a corporate history of almost 240 years and production plants in Germany, China and in the USA.
Today Kurtz GmbH is one of the globally leading manufacturers of machines for the processing of particle foams such as EPS,EPP, EPE and E-TPU. The product range covers pre-expanders, shape moulding machines, block moulds, recycling and cutting lines.
Since 1983, Kurtz has been producing foundry machines and enjoys an excellent reputation as expert in low-pressure, gravity and tiltable casting machines as well as for trimming presses. If requested, particle foam machines, casting machines and trimming presses are available as fully automated systems. Kurtz always focuses on the entire process. All components and modules are optimally matched to one another. At Kurtz the customer obtains planning, engineering, process and mold technology, automation and handling, peripherals as well as complete lines.
Kurtz is designing and supplying complete plants for the production of blocks and mouldings as well as of structural and chassisparts.
Today Kurtz GmbH is one of the globally leading manufacturers of machines for the processing of particle foams such as EPS,EPP, EPE and E-TPU. The product range covers pre-expanders, shape moulding machines, block moulds, recycling and cutting lines.
Since 1983, Kurtz has been producing foundry machines and enjoys an excellent reputation as expert in low-pressure, gravity and tiltable casting machines as well as for trimming presses. If requested, particle foam machines, casting machines and trimming presses are available as fully automated systems. Kurtz always focuses on the entire process. All components and modules are optimally matched to one another. At Kurtz the customer obtains planning, engineering, process and mold technology, automation and handling, peripherals as well as complete lines.
Kurtz is designing and supplying complete plants for the production of blocks and mouldings as well as of structural and chassisparts.
당사 소개
내용보기 Künkel-Wagner was established in 1907 as a mechanical engineering
company specialized in foundry technology. Since then, the headquarters
of the internationally operating company including administration, a
research and development division, fabrication division and project
management is situated in Alfeld (near Hanover).
Since the construction of the very first hand moulding machines in
the year 1911, Künkel-Wagner has considerably contributed to the
advancement of the foundry technology and has developed a wide range of
foundry equipment.
In the late 1950s, Künkel-Wagner was one of the first companies
offering fully automatic moulding plants. Innovative moulding techniques
were developed and the first alternatives to jolt-squeeze moulding
machines presented. It did not take long for us to realise the
importance and relevance of the quality of sand preparation plants for
the casting process and we consequently integrated moulding sand
preparation in our own production programme.
There were concepts for core sand separation as early as in the
1980s. Even today, we continue to meet this early set target and offer
solutions for improved moulding sand quality in moulding plant
technology, as well as in the field of sand processing. With the current
compaction procedure, complicated contours can be produced reliably and
with the necessary strength. Simple casting machines were already built
in early years to round off the production programme; they have
developed into our current automatic pouring equipment.
Throughout the production of the machines of the latest generation,
process relevant parameters are recorded and alarm messages, if
necessary, generated and archived.Thus, the required documentation for
the process control can be guaranteed. In combination with innovation,
expertise and experience, all products boast durability and high-quality
implementation.
“Made in Germany” is backed by long experience and deep know-how and
forms major guiding principles for the development of our company.
company specialized in foundry technology. Since then, the headquarters
of the internationally operating company including administration, a
research and development division, fabrication division and project
management is situated in Alfeld (near Hanover).
Since the construction of the very first hand moulding machines in
the year 1911, Künkel-Wagner has considerably contributed to the
advancement of the foundry technology and has developed a wide range of
foundry equipment.
In the late 1950s, Künkel-Wagner was one of the first companies
offering fully automatic moulding plants. Innovative moulding techniques
were developed and the first alternatives to jolt-squeeze moulding
machines presented. It did not take long for us to realise the
importance and relevance of the quality of sand preparation plants for
the casting process and we consequently integrated moulding sand
preparation in our own production programme.
There were concepts for core sand separation as early as in the
1980s. Even today, we continue to meet this early set target and offer
solutions for improved moulding sand quality in moulding plant
technology, as well as in the field of sand processing. With the current
compaction procedure, complicated contours can be produced reliably and
with the necessary strength. Simple casting machines were already built
in early years to round off the production programme; they have
developed into our current automatic pouring equipment.
Throughout the production of the machines of the latest generation,
process relevant parameters are recorded and alarm messages, if
necessary, generated and archived.Thus, the required documentation for
the process control can be guaranteed. In combination with innovation,
expertise and experience, all products boast durability and high-quality
implementation.
“Made in Germany” is backed by long experience and deep know-how and
forms major guiding principles for the development of our company.
- 틸트 포어링 장비 | 코어 촬영 기계 | 다이 캐스팅 장비
- 틸트 포어링 장비 | 주조 장비 | 다이 캐스팅 장비
- 틸트 포어링 장비 | 주조 장비 | 다이 캐스팅 장비
틸트 포어링 장비 - 제조업체, 딜러, 공급업체
특정 내용 및 가격 관련 정보를 신속하게 확인하려면 검색 결과 페이지에서 특별 서비스 양식을 이용하십시오.
IndustryStock의 전담팀 귀하의 요청 사항에 맞는 최적의 틸트 포어링 장비 관련 제조업체, 판매업체 또는 서비스업체 등을 보다 신속하게 찾아 귀하가 작성한 메일을 전달합니다.
당신은 사업상 틸트 포어링 장비 을(를) 찾고 계십니까?
틸트 포어링 장비로의 비즈니스 여행을 생각하고 계십니까? IndustryStock의 제품과 서비스 검색은 틸트 포어링 장비에 대한 관련 검색결과를 제공합니다. 틸트 포어링 장비 이외에도 기타 다른 제품과 서비스를 검색하실 수 있습니다. 틸트 포어링 장비에 대한 등록된 제조업체와 배급업체의 모든 담당자 정보는 무료로 제공됩니다.
이 페이지에 있는 정보를 어떻게 평가하십니까?
5 평가 92%