5 Cégek a következőhöz ✓ B2B gyártók, kereskedők és beszállítók az 2 országokból ✓ Különleges szolgáltatással gyors információért és árakért ✓
Keresés az alábbiak szerint:
97892 Kreuzwertheim, Németország Kurtz Holding GmbH & Co. Beteiligungs KG Gyártó ✓ Beszállító ✓ Szolgáltató ✓
Cégünkről
Tovább olvas Kurtz GmbH is a member of the Kurtz Ersa Corporation,an owner-managed, internationally active group of technology and suppliercompanies with a corporate history of almost 240 years and production plants in Germany, China and in the USA.
Today Kurtz GmbH is one of the globally leading manufacturers of machines for the processing of particle foams such as EPS,EPP, EPE and E-TPU. The product range covers pre-expanders, shape moulding machines, block moulds, recycling and cutting lines.
Since 1983, Kurtz has been producing foundry machines and enjoys an excellent reputation as expert in low-pressure, gravity and tiltable casting machines as well as for trimming presses. If requested, particle foam machines, casting machines and trimming presses are available as fully automated systems. Kurtz always focuses on the entire process. All components and modules are optimally matched to one another. At Kurtz the customer obtains planning, engineering, process and mold technology, automation and handling, peripherals as well as complete lines.
Kurtz is designing and supplying complete plants for the production of blocks and mouldings as well as of structural and chassisparts.
Today Kurtz GmbH is one of the globally leading manufacturers of machines for the processing of particle foams such as EPS,EPP, EPE and E-TPU. The product range covers pre-expanders, shape moulding machines, block moulds, recycling and cutting lines.
Since 1983, Kurtz has been producing foundry machines and enjoys an excellent reputation as expert in low-pressure, gravity and tiltable casting machines as well as for trimming presses. If requested, particle foam machines, casting machines and trimming presses are available as fully automated systems. Kurtz always focuses on the entire process. All components and modules are optimally matched to one another. At Kurtz the customer obtains planning, engineering, process and mold technology, automation and handling, peripherals as well as complete lines.
Kurtz is designing and supplying complete plants for the production of blocks and mouldings as well as of structural and chassisparts.
Cégünkről
Tovább olvas Künkel-Wagner was established in 1907 as a mechanical engineering
company specialized in foundry technology. Since then, the headquarters
of the internationally operating company including administration, a
research and development division, fabrication division and project
management is situated in Alfeld (near Hanover).
Since the construction of the very first hand moulding machines in
the year 1911, Künkel-Wagner has considerably contributed to the
advancement of the foundry technology and has developed a wide range of
foundry equipment.
In the late 1950s, Künkel-Wagner was one of the first companies
offering fully automatic moulding plants. Innovative moulding techniques
were developed and the first alternatives to jolt-squeeze moulding
machines presented. It did not take long for us to realise the
importance and relevance of the quality of sand preparation plants for
the casting process and we consequently integrated moulding sand
preparation in our own production programme.
There were concepts for core sand separation as early as in the
1980s. Even today, we continue to meet this early set target and offer
solutions for improved moulding sand quality in moulding plant
technology, as well as in the field of sand processing. With the current
compaction procedure, complicated contours can be produced reliably and
with the necessary strength. Simple casting machines were already built
in early years to round off the production programme; they have
developed into our current automatic pouring equipment.
Throughout the production of the machines of the latest generation,
process relevant parameters are recorded and alarm messages, if
necessary, generated and archived.Thus, the required documentation for
the process control can be guaranteed. In combination with innovation,
expertise and experience, all products boast durability and high-quality
implementation.
“Made in Germany” is backed by long experience and deep know-how and
forms major guiding principles for the development of our company.
company specialized in foundry technology. Since then, the headquarters
of the internationally operating company including administration, a
research and development division, fabrication division and project
management is situated in Alfeld (near Hanover).
Since the construction of the very first hand moulding machines in
the year 1911, Künkel-Wagner has considerably contributed to the
advancement of the foundry technology and has developed a wide range of
foundry equipment.
In the late 1950s, Künkel-Wagner was one of the first companies
offering fully automatic moulding plants. Innovative moulding techniques
were developed and the first alternatives to jolt-squeeze moulding
machines presented. It did not take long for us to realise the
importance and relevance of the quality of sand preparation plants for
the casting process and we consequently integrated moulding sand
preparation in our own production programme.
There were concepts for core sand separation as early as in the
1980s. Even today, we continue to meet this early set target and offer
solutions for improved moulding sand quality in moulding plant
technology, as well as in the field of sand processing. With the current
compaction procedure, complicated contours can be produced reliably and
with the necessary strength. Simple casting machines were already built
in early years to round off the production programme; they have
developed into our current automatic pouring equipment.
Throughout the production of the machines of the latest generation,
process relevant parameters are recorded and alarm messages, if
necessary, generated and archived.Thus, the required documentation for
the process control can be guaranteed. In combination with innovation,
expertise and experience, all products boast durability and high-quality
implementation.
“Made in Germany” is backed by long experience and deep know-how and
forms major guiding principles for the development of our company.
- Billentő öntőgép | Maglövő gépek | Kokillaöntő gépek
- Billentő öntőgép | Öntögépek | Kokillaöntő gépek
79713 Görwihl, Németország irobotics GmbH Gyártó ✓ Kereskedő ✓ Beszállító ✓ Szolgáltató ✓
Cégprofilok Üzenetküldés
- Billentő öntőgép | Öntögépek | Kokillaöntő gépek
Billentő öntőgép - Gyártók, Kereskedők és Beszállítók
Ha szeretne időt megtakarítani, töltse ki Billentő öntőgép speciális szolgáltatási űrlapunkat.
Speciális csapatunk megkeresi az Ön kérésének megfelelő Billentő öntőgép gyártókat, kereskedőket vagy szolgáltatókat, és közvetlenül továbbítja kérését az Ön által keresett célcsoportokhoz.
A következő terméket keresi: Billentő öntőgép?
Ön üzletileg keres Billentő öntőgép? Az IndustryStock termék és szolgáltatás keresőgépe csak a releváns találatokat kínálja fel Önnek Billentő öntőgép. Itt a Billentő öntőgép mellet további termékeket és szolgáltatásokat kereshet. A Billentő öntőgép témához bejegyzett gyártók és kereskedők kapcsolati adatai minden felhasználó számára szabadon megtekinthetők
Hogyan értékeli az ezen az oldalon található információkat?
5 Értékelések 92%