11 Nefes alma cihazları ile ilişkin firmalar ✓ B2B üreticiler, bayiler ve tedarikçiler 4 ülkelerinden ✓Hızlı bilgi ve fiyatlar için özel hizmet ✓
Filtrele:
Hakkımızda
Devamını oku Since 1979, we produce equipments for;
OCCUPATIONAL HEALTH AND SAFETY
FIRST AID & CIVIL DEFENSE
FIRE & CBRN & PERSONAL PROTECTION.
Our headquarters and factory are located in Ankara. With our network of distributors spread all over the country and worldwide
we distribute our best and high quality service to customers in the shortest time.
Our company has TS EN ISO 9001 Quality Certificate. All our products are certified according to international standards.
What We Do at our Emergency Shower Division
We provide variety of special services you may need.
Engineering Consultation
IST provides complete information on the design, use, supply and care of emergency showers and eye/face wash fountains, safety storage and plunger cans, spill containment systems, decontamination systems and airline breathing systems. For all your needs during a new plant installation or facility renovation, our experienced team will guide you to the best and most economical solution.
Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. For interior and exterior applications, we offer high quality systems with heating or cooling, with freeze protection, portable or fixed special systems.
Special Engineering Solutions
Each shower is designed for different purposes and cannot substitute each other. In addition, standardized units with heating or cooling, may not always be the right choice for your needs. IST is fully equipped to offer and produce the special designed systems according to your needs.
Adjusting Water Temperature
Tepid water supply (16 - 38 ° C), which is a requirement of both American and European standards, requires special attention. Our expert team has the capability to analyze resources of your facility and offer solutions to ensure that emergency showers and eye / face wash fountains will work properly under all circumstances. Our experts will work in coordination with your design or expert team.
Pre-Sales Solid Modelling and Technical Drawing
We provide customized design and engineering solutions to customers with our advanced three-dimensional solid modelling software. In this way, our customers can more easily analyze the suitability of the product to their facility and can plan the project accordingly. Two or three dimensional detailed technical drawings are available for all our products.
After-Sales Support
Our expert technicians can evaluate your existing emergency shower and eye/face wash fountain systems to ensure compliance with ANSI and EN Standards. Our expert team will assist you about training and product setup for your new emergency shower.
All our products are guaranteed against production and workmanship defects for a period of 24 months.
What We Do at our Protective Clothings Division
We provide variety of special services you may need.
Consultation
IST provides complete information on the design, use, supply and care of industrial heat and flame protective workwear / underwear / balaclavas, electric arc protective clothings, fireman suits, aluminized fire proximity/entry suits, air cooled kiln entry clothings, functional and thermal underwears/t-shirts. Our experienced team will provide you the best economical solution with customized size dimensions, preliminary study and technical drawings.
Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. We provide special protective clothing solutions suitable for work areas, that do not compromise protection while providing ease of movement.
Special Engineering Solutions
Each garment is designed for different purposes and has different certificates. A protective garment cannot substitute another. The most suitable and most appropriate solution must be determined according to the protection level and area of use. In IST® textile production workshop, fabrics are cut by using licensed cloth spreading software to combine the best designs with the best stitching properties with same pattern in all sizes and to prevent the possibility of encountering an error. IST® is fully equipped to offer and produce standard and special designed garments according to your needs.
Complementary Accessories Selection
Complementary elements of protective clothing are of great importance for full protection. You can easily choose and gather the most suitable complementary materials that can be specially used with the protective clothing you purchased such as; personal protective equipments like head, face, hand, respiratory, foot protectors, from our range. Our expert team will guide you in choosing your protective garment and choosing a complementary accessory with the most appropriate international standards for your working area.
Pre-Sales Support and Modelling
Before production, we design your protective clothing in our advanced technical drawing softwares according to your preferences and submit to your approval. Protective clothings that are purchased because of their high protection levels, but are unsuitable for the working facility may not provide adequate protection and may result in high costs for your company. Appropriate personal protective equipment should be determined as a result of risk analysis by experts. In this regard, our technical team will work in coordination with experts in your facility.
Standards and Certification
All our products are fully tested by notified bodies in Europe according to the relevant European standards and certified according to the relevant EN standards. In selection of protective clothings, labels inside the suit must be examined well, labels must be printed in accordance with European standards. The information on the label must be verified with certificates. In this regard, our expert technical team will provide consultation to you valuable customers.
After-Sales Support
Our company provides the necessary information, training and solutions to its customers on the maintenance, use and periodic controls of purchased products. Our company gives repair services for all standard and/or special design protective clothings that are damaged, or have worn parts. In this sense, it is aimed that the user can use the existing product for a long time instead of buying new product.
Our sales representatives can provide training on the use of the products. All of our products are warranted against production and workmanship defects for a period of 24 months.
OCCUPATIONAL HEALTH AND SAFETY
FIRST AID & CIVIL DEFENSE
FIRE & CBRN & PERSONAL PROTECTION.
Our headquarters and factory are located in Ankara. With our network of distributors spread all over the country and worldwide
we distribute our best and high quality service to customers in the shortest time.
Our company has TS EN ISO 9001 Quality Certificate. All our products are certified according to international standards.
What We Do at our Emergency Shower Division
We provide variety of special services you may need.
Engineering Consultation
IST provides complete information on the design, use, supply and care of emergency showers and eye/face wash fountains, safety storage and plunger cans, spill containment systems, decontamination systems and airline breathing systems. For all your needs during a new plant installation or facility renovation, our experienced team will guide you to the best and most economical solution.
Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. For interior and exterior applications, we offer high quality systems with heating or cooling, with freeze protection, portable or fixed special systems.
Special Engineering Solutions
Each shower is designed for different purposes and cannot substitute each other. In addition, standardized units with heating or cooling, may not always be the right choice for your needs. IST is fully equipped to offer and produce the special designed systems according to your needs.
Adjusting Water Temperature
Tepid water supply (16 - 38 ° C), which is a requirement of both American and European standards, requires special attention. Our expert team has the capability to analyze resources of your facility and offer solutions to ensure that emergency showers and eye / face wash fountains will work properly under all circumstances. Our experts will work in coordination with your design or expert team.
Pre-Sales Solid Modelling and Technical Drawing
We provide customized design and engineering solutions to customers with our advanced three-dimensional solid modelling software. In this way, our customers can more easily analyze the suitability of the product to their facility and can plan the project accordingly. Two or three dimensional detailed technical drawings are available for all our products.
After-Sales Support
Our expert technicians can evaluate your existing emergency shower and eye/face wash fountain systems to ensure compliance with ANSI and EN Standards. Our expert team will assist you about training and product setup for your new emergency shower.
All our products are guaranteed against production and workmanship defects for a period of 24 months.
What We Do at our Protective Clothings Division
We provide variety of special services you may need.
Consultation
IST provides complete information on the design, use, supply and care of industrial heat and flame protective workwear / underwear / balaclavas, electric arc protective clothings, fireman suits, aluminized fire proximity/entry suits, air cooled kiln entry clothings, functional and thermal underwears/t-shirts. Our experienced team will provide you the best economical solution with customized size dimensions, preliminary study and technical drawings.
Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. We provide special protective clothing solutions suitable for work areas, that do not compromise protection while providing ease of movement.
Special Engineering Solutions
Each garment is designed for different purposes and has different certificates. A protective garment cannot substitute another. The most suitable and most appropriate solution must be determined according to the protection level and area of use. In IST® textile production workshop, fabrics are cut by using licensed cloth spreading software to combine the best designs with the best stitching properties with same pattern in all sizes and to prevent the possibility of encountering an error. IST® is fully equipped to offer and produce standard and special designed garments according to your needs.
Complementary Accessories Selection
Complementary elements of protective clothing are of great importance for full protection. You can easily choose and gather the most suitable complementary materials that can be specially used with the protective clothing you purchased such as; personal protective equipments like head, face, hand, respiratory, foot protectors, from our range. Our expert team will guide you in choosing your protective garment and choosing a complementary accessory with the most appropriate international standards for your working area.
Pre-Sales Support and Modelling
Before production, we design your protective clothing in our advanced technical drawing softwares according to your preferences and submit to your approval. Protective clothings that are purchased because of their high protection levels, but are unsuitable for the working facility may not provide adequate protection and may result in high costs for your company. Appropriate personal protective equipment should be determined as a result of risk analysis by experts. In this regard, our technical team will work in coordination with experts in your facility.
Standards and Certification
All our products are fully tested by notified bodies in Europe according to the relevant European standards and certified according to the relevant EN standards. In selection of protective clothings, labels inside the suit must be examined well, labels must be printed in accordance with European standards. The information on the label must be verified with certificates. In this regard, our expert technical team will provide consultation to you valuable customers.
After-Sales Support
Our company provides the necessary information, training and solutions to its customers on the maintenance, use and periodic controls of purchased products. Our company gives repair services for all standard and/or special design protective clothings that are damaged, or have worn parts. In this sense, it is aimed that the user can use the existing product for a long time instead of buying new product.
Our sales representatives can provide training on the use of the products. All of our products are warranted against production and workmanship defects for a period of 24 months.
- Nefes alma cihazları | Solunum cihazları
23558 Lübeck, Almanya Drägerwerk AG & Co. KGaA Üreticiler ✓ Hizmet Veren Kurumlar ✓
Firma Profili Gönder
- Nefes alma cihazları | Solunum pnömatik tertibatı
1110 Viyana, Avusturya AGB- Anlagen-Geräte-Betriebstechnik Ges.m.b.H Üreticiler ✓ Satıcılar ✓ Teslimatçılar ✓ Hizmet Veren Kurumlar ✓
Firma Profili Gönder
- Nefes alma cihazları
- Nefes alma cihazları
- Nefes alma cihazları | Solunum cihazları
- Nefes alma cihazları
49134 Wallenhorst, Almanya Weiten Industrie-Service GmbH & Co. KG Satıcılar ✓ Teslimatçılar ✓ Hizmet Veren Kurumlar ✓
Firma Profili Gönder
- Nefes alma cihazları
- Nefes alma cihazları
Hakkımızda
Devamını oku IDE Compressors GmbH, geçmişi ürün geliştirme ve teknolojik yeniliklerle karakterize edilen bir aile şirketidir. IDE, başarılı ve yenilikçi bir kompresör üreticisidir ve Verein Deutsch Manufakturen (Alman Üreticileri Derneği) sıkı sertifikasyon standartlarını karşılamıştır.
"Manufaktur" geniş bir el yapımı üretim yelpazesini, en yüksek kaliteyi, büyük Ar-Ge potansiyelini ve yeniliği temsil eder-kavramsal olarak büyük ölçekli üretimin tam tersidir.
Fabrikamızda, en yüksek kalite ve en modern teknolojiye özel yatırım isteyen insanlar ve kuruluşlar için ürünler üretiyoruz.
"Manufaktur" geniş bir el yapımı üretim yelpazesini, en yüksek kaliteyi, büyük Ar-Ge potansiyelini ve yeniliği temsil eder-kavramsal olarak büyük ölçekli üretimin tam tersidir.
Fabrikamızda, en yüksek kalite ve en modern teknolojiye özel yatırım isteyen insanlar ve kuruluşlar için ürünler üretiyoruz.
Hauser Umwelt-Service GmbH Üreticiler ✓ Satıcılar ✓ Teslimatçılar ✓ Hizmet Veren Kurumlar ✓
Hakkımızda
Devamını oku In 1994, Hansgeorg Hauser founded Hauser Umwelt-Service from the parent company of Hauser GmbH, thus creating the basis for a company for breathing air supply systems and air filters that placed the health of users at the centre of its own actions.
The company has remained true to this basic idea to this day, even though Hansgeorg Hauser retired from the management at the end of 2017. With his successor Carsten Plänker, who carries this basic idea into the future, the company continues to be optimally positioned, especially since the "senior" continues to support the company in an advisory capacity.
The two managing directors Carsten Plänker and Stephan Hauser as well as the approximately 80 employees of the HauserGroup will be pleased to provide competent advice. As the foundation of the HauserGroup - with the balanced age structure from trainees to "old hands" - we offer you the security for a long cooperation. This is how tradition is paired with innovation in a company that never stops developing.
The company has remained true to this basic idea to this day, even though Hansgeorg Hauser retired from the management at the end of 2017. With his successor Carsten Plänker, who carries this basic idea into the future, the company continues to be optimally positioned, especially since the "senior" continues to support the company in an advisory capacity.
The two managing directors Carsten Plänker and Stephan Hauser as well as the approximately 80 employees of the HauserGroup will be pleased to provide competent advice. As the foundation of the HauserGroup - with the balanced age structure from trainees to "old hands" - we offer you the security for a long cooperation. This is how tradition is paired with innovation in a company that never stops developing.
Nefes alma cihazları - Üreticiler, Satıcılar, Teslimatçılar
Nefes alma cihazları araması için hiç mi zaman yok? Bilgilerinizi özel hizmet formuna girmeniz yeterlidir.
Industrystock ekibimiz Nefes alma cihazları ile ilişkin başvurunuz için daha hızlı bir şekilde en iyi üretici, bayi veya hizmet sağlayıcısını bulur ve e-posta mesajınızı istenen hedef gruplarına iletir.
Nefes alma cihazları için arama mı yapıyorsunuz?
Nefes alma cihazları için arama mı yapıyorsunuz? IndustryStock'un ürün ve hizmet arama motoru Nefes alma cihazları ile ilgili uygun sonuçlar sunar. Ayrıca Nefes alma cihazları ile ilişkili diğer ürün grupları içinde de arama yapabilir, Nefes alma cihazları konusuyla ilgili daha fazla kayıtlı üretici ve satıcı bilgisine ulaşabilirsiniz.
Nefes alma cihazları - sinonim, /
- Soluma havası besleme sistemleri
Bu sayfadaki bilgileri nasıl değerlendirirsiniz?
11 Değerlendirmeler 90%