9 شركة (شركات) بخصوص ناقل القوالب ✓ الشركات المُصَنِّعة والتجار والموردين بقطاع المعاملات التجارية من 3 دولة (دول) ✓ مع خدمة خاصة للبحث السريع عن المعلومات والأسعار ✓
تصفية نتائج البحث باستخدام:
67308 Bubenheim, ألمانيا Dämmstoff-Fabrik Klein GmbH شركة مصنعة ✓ تاجر ✓
من نحن
قراءة المزيد The roots of our company are in Ludwigshafen am Rhein. This is where the businessman Karl Klein, father of two sons, ran the company Ludwigshafener Isolierfabrik K.G. in Ludwigshafen-Mundenheim.
1932 His son, Willi Klein, took over management of the lime works August Kaege in Harxheim/Zellertal.
1959 He founded the Willi Klein insulation materials as a vermiculite expansion operation. This was simultaneously the foundation for the company as it is today.
1961 The lime works, August Kaege Nachf., were taken out of operation.
1975 Willi Klein died and the company has been run by his son, Friedhelm Klein, ever since.
1979 Production was expanded by the setup of a perlite expansion system. Dämmstoff-Fabrik Klein GmbH was founded in the same year.
1985 The moulded parts production "Kawalite" goes into operation.
1996 The new developments in the field of preventative fire protection ("Hapuflam fire protection systems") then followed. Another company was founded on this basis: HaPu Brandschutz Systeme GmbH.
2010 Product and production expansion with takeover of the cable fire stop system "Staudt".
1932 His son, Willi Klein, took over management of the lime works August Kaege in Harxheim/Zellertal.
1959 He founded the Willi Klein insulation materials as a vermiculite expansion operation. This was simultaneously the foundation for the company as it is today.
1961 The lime works, August Kaege Nachf., were taken out of operation.
1975 Willi Klein died and the company has been run by his son, Friedhelm Klein, ever since.
1979 Production was expanded by the setup of a perlite expansion system. Dämmstoff-Fabrik Klein GmbH was founded in the same year.
1985 The moulded parts production "Kawalite" goes into operation.
1996 The new developments in the field of preventative fire protection ("Hapuflam fire protection systems") then followed. Another company was founded on this basis: HaPu Brandschutz Systeme GmbH.
2010 Product and production expansion with takeover of the cable fire stop system "Staudt".
5552 Forstau, النمسا ALBA tooling & engineering GmbH شركة مصنعة ✓ مقدم خدمة ✓
نبذة عن الشركة إرسال استفسار
- ناقل القوالب
- ناقل القوالب
28279 Bremen, ألمانيا Binder-Edelstahl-Produktionsgesellschaft mbH شركة مصنعة ✓ مقدم خدمة ✓
نبذة عن الشركة إرسال استفسار
- ناقل القوالب
87647 Unterthingau, ألمانيا Drehtechnik Stetzberger GmbH شركة مصنعة ✓ تاجر ✓ مورد ✓ مقدم خدمة ✓
نبذة عن الشركة إرسال استفسار
- ناقل القوالب
- ناقل القوالب
- ناقل القوالب
- ناقل القوالب
من نحن
قراءة المزيد The family-owned company DEGUMA-SCHÜTZ GmbH is a medium-sized machine manufacturer. We have specialised in manufacturing, overhauling and modernising equipment for the rubber and plastic processing industry.
Worldwide, the demand for rubber and plastic products is on the rise and so is the need for production machinery.
The special expertise that gives DEGUMA the edge stems from many years of experience in modernising second-hand machinery according to current standards. This expertise influences the development of our new machinery, too. We use the latest technology and carry out all mechanical and welding engineering at our own site. The same applies to the construction and implementation of need-based electrical controls. That way, we are the single source for all processes involved.
Without compromise, we focus on delivering the highest quality and finest German workmanship through our mechanical engineering as well as our service department. Our performance is based on a strong team with high aspirations. In order to live up to these aspirations, DEGUMA offers sustainable all-round solutions that are proven in the field, ensuring that the right machine is at the right place at the right time.
The satisfaction of our customers is proof that we are on the right track.
Worldwide, the demand for rubber and plastic products is on the rise and so is the need for production machinery.
The special expertise that gives DEGUMA the edge stems from many years of experience in modernising second-hand machinery according to current standards. This expertise influences the development of our new machinery, too. We use the latest technology and carry out all mechanical and welding engineering at our own site. The same applies to the construction and implementation of need-based electrical controls. That way, we are the single source for all processes involved.
Without compromise, we focus on delivering the highest quality and finest German workmanship through our mechanical engineering as well as our service department. Our performance is based on a strong team with high aspirations. In order to live up to these aspirations, DEGUMA offers sustainable all-round solutions that are proven in the field, ensuring that the right machine is at the right place at the right time.
The satisfaction of our customers is proof that we are on the right track.
ناقل القوالب - شركات مصنعة, تجار, متعهدون
استخدم استمارة الخدمة الخاصة وأدخل طلب بحثك عن ناقل القوالب.
فريق IndustryStock سيبحث عن طلب بحثك ويجد لك سريعًا المُصَنِّع المناسب أو التاجر المناسب أو مُقدّم الخدمة المناسب بخصوص ناقل القوالب ويعيد إرسال رسالتك سريعًا إلى هذه الشركات.
هل تبحث عن ناقل القوالب؟ بالإضافة إلى ما يقدمه محرك بحث
هل تبحثون عن شركات ناقل القوالب؟ لا يقدم محرك البحث للخدمات والشركات في IndustryStock النتائج ذات العلاقة بـ ناقل القوالب و حسب. حيث يمكنكم أيضا العثور على المزيد من المنتجات والخدمات، وجميع بيانات الاتصال التي تخص التجار والمصنعين المسجلين في الموضوع ناقل القوالب والذين يمكن لكافة المستخدمين الاطلاع على بياناتهم .
ما تقييمك للمعلومات الواردة بهذه الصفحة؟
7 التقييمات 96%