9 Cégek a következőhöz ✓ B2B gyártók, kereskedők és beszállítók az 3 országokból ✓ Különleges szolgáltatással gyors információért és árakért ✓
Keresés az alábbiak szerint:
67308 Bubenheim, Németország Dämmstoff-Fabrik Klein GmbH Gyártó ✓ Kereskedő ✓
Cégünkről
Tovább olvas The roots of our company are in Ludwigshafen am Rhein. This is where the businessman Karl Klein, father of two sons, ran the company Ludwigshafener Isolierfabrik K.G. in Ludwigshafen-Mundenheim.
1932 His son, Willi Klein, took over management of the lime works August Kaege in Harxheim/Zellertal.
1959 He founded the Willi Klein insulation materials as a vermiculite expansion operation. This was simultaneously the foundation for the company as it is today.
1961 The lime works, August Kaege Nachf., were taken out of operation.
1975 Willi Klein died and the company has been run by his son, Friedhelm Klein, ever since.
1979 Production was expanded by the setup of a perlite expansion system. Dämmstoff-Fabrik Klein GmbH was founded in the same year.
1985 The moulded parts production "Kawalite" goes into operation.
1996 The new developments in the field of preventative fire protection ("Hapuflam fire protection systems") then followed. Another company was founded on this basis: HaPu Brandschutz Systeme GmbH.
2010 Product and production expansion with takeover of the cable fire stop system "Staudt".
1932 His son, Willi Klein, took over management of the lime works August Kaege in Harxheim/Zellertal.
1959 He founded the Willi Klein insulation materials as a vermiculite expansion operation. This was simultaneously the foundation for the company as it is today.
1961 The lime works, August Kaege Nachf., were taken out of operation.
1975 Willi Klein died and the company has been run by his son, Friedhelm Klein, ever since.
1979 Production was expanded by the setup of a perlite expansion system. Dämmstoff-Fabrik Klein GmbH was founded in the same year.
1985 The moulded parts production "Kawalite" goes into operation.
1996 The new developments in the field of preventative fire protection ("Hapuflam fire protection systems") then followed. Another company was founded on this basis: HaPu Brandschutz Systeme GmbH.
2010 Product and production expansion with takeover of the cable fire stop system "Staudt".
22525 Lotte, Németország FRIMO Group GmbH Gyártó ✓ Beszállító ✓ Szolgáltató ✓
Cégprofilok Üzenetküldés
- Formatartó
5552 Forstau, Ausztria ALBA tooling & engineering GmbH Gyártó ✓ Szolgáltató ✓
Cégprofilok Üzenetküldés
- Formatartó
- Formatartó
28279 Bremen, Németország Binder-Edelstahl-Produktionsgesellschaft mbH Gyártó ✓ Szolgáltató ✓
Cégprofilok Üzenetküldés
- Formatartó
87647 Unterthingau, Németország Drehtechnik Stetzberger GmbH Gyártó ✓ Kereskedő ✓ Beszállító ✓ Szolgáltató ✓
Cégprofilok Üzenetküldés
- Formatartó
- Formatartó
- Formatartó
Cégünkről
Tovább olvas The family-owned company DEGUMA-SCHÜTZ GmbH is a medium-sized machine manufacturer. We have specialised in manufacturing, overhauling and modernising equipment for the rubber and plastic processing industry.
Worldwide, the demand for rubber and plastic products is on the rise and so is the need for production machinery.
The special expertise that gives DEGUMA the edge stems from many years of experience in modernising second-hand machinery according to current standards. This expertise influences the development of our new machinery, too. We use the latest technology and carry out all mechanical and welding engineering at our own site. The same applies to the construction and implementation of need-based electrical controls. That way, we are the single source for all processes involved.
Without compromise, we focus on delivering the highest quality and finest German workmanship through our mechanical engineering as well as our service department. Our performance is based on a strong team with high aspirations. In order to live up to these aspirations, DEGUMA offers sustainable all-round solutions that are proven in the field, ensuring that the right machine is at the right place at the right time.
The satisfaction of our customers is proof that we are on the right track.
Worldwide, the demand for rubber and plastic products is on the rise and so is the need for production machinery.
The special expertise that gives DEGUMA the edge stems from many years of experience in modernising second-hand machinery according to current standards. This expertise influences the development of our new machinery, too. We use the latest technology and carry out all mechanical and welding engineering at our own site. The same applies to the construction and implementation of need-based electrical controls. That way, we are the single source for all processes involved.
Without compromise, we focus on delivering the highest quality and finest German workmanship through our mechanical engineering as well as our service department. Our performance is based on a strong team with high aspirations. In order to live up to these aspirations, DEGUMA offers sustainable all-round solutions that are proven in the field, ensuring that the right machine is at the right place at the right time.
The satisfaction of our customers is proof that we are on the right track.
Formatartó - Gyártók, Kereskedők és Beszállítók
Semmi ideje sincs Formatartó keresésre? Egyszerűen adja meg adatait a speciális szolgáltatási űrlapon.
Az Ön IndustryStock csapata gyorsan megtalálja a keresési lekérdezéséhez legmegfelelőbb Formatartógyártókat, kereskedőket vagy szolgáltatókat, és gyorsan továbbítja üzenetét ezeknek a vállalatoknak.
A következő terméket keresi: Formatartó?
Ön üzletileg keres Formatartó? Az IndustryStock termék és szolgáltatás keresőgépe csak a releváns találatokat kínálja fel Önnek Formatartó. Itt a Formatartó mellet további termékeket és szolgáltatásokat kereshet. A Formatartó témához bejegyzett gyártók és kereskedők kapcsolati adatai minden felhasználó számára szabadon megtekinthetők
Hogyan értékeli az ezen az oldalon található információkat?
7 Értékelések 96%