25 companies for Wall Ducts ✓ B2B manufacturers, distributors & suppliers from 1 countries ✓ With special service for fast information and prices ✓
Wooden houses are or become more and more popular. Of course the fire protection regulations have to be obeyed carefully. Special protection measures are required if a boiler or an oven has to be installed. In order to insert those wall bushings easily and safely Schräder has developed a new wall and ceiling bushing. This bushing is used where the waste gas pipe has to be mounted through inflammable materials. This bushing is equipped with a novel glass fibre insulant with a multiple better insulation than conventional material (mineral wool). The special composition allows the reduction of the distance ti inflammable parts to 80 mm compared to the standard 200 mm.
For installation a hole has to be cut into the wooden wall. Then the wall bushing will be inserted and fixed. The bushing will be covered by a front panel made of Vermiculit which serves as heat protection and radiation blind. A stainless steel blind which covers the waste gas pipe totally completes the wall bushing.
The wall bushing made by Schräder is available for nominal chimney diameters from 130 to 200 mm and for wall thicknesses 0f 12, 24 and 36 cm. It is certifies by the Deutsches Institut für Bautechnik in Berlin (certificate number Z-7.3-3408) and offers therefore proofed safety.
- Wall Ducts
- Wall Ducts | Wall Penetration | Implementation Systems
- Wall Ducts
We are pleased that you are interested in learning more about us. You have come to the right place if you are looking for a competent partner who manufactures industrial cooling systems for a wide range of applications.
On the following pages we would like to give you an insight into our company history, our philosophy, our standards and our extensive product range. Our customers include: Generator set manufacturers, agricultural machinery manufacturers and special vehicle manufacturers.
We look forward to working successfully with you soon.
- Wall Ducts
- Wall Ducts
- Wall Ducts
- Wall Ducts
- Wall Ducts
- Wall Ducts
- Wall Ducts
- Wall Ducts
- Wall Ducts | Implementation Systems | Pipe penetration systems
- Wall Ducts
- Wall Ducts
- Wall Ducts | Pipe Bushings
- Wall Ducts | Cable Bushings | Cable Penetration Systems
- Wall Ducts
Because the system allows you to modify the composition of the rubber modules to meet the needs of the immediate situation, the system can be used for a multitude of purposes. The system can be assembled and mounted on-site after connectors are attached to cables, making it an adaptable solution for all challenges. You can conduct through the partable system your with connectors ready-made cable and seal it up.
BR-Cable bushings®
refractory, gas- and watertight, for installation, bricking-in and concreting into walls, or for welding into steel constructions
Our 50 years of experience on the German market stand behind this system. It consists of steel frames that are built into ceilings or walls, walled in or set in concrete. We call the frames for this RGB. RGS frames are available for welding into steel structures. Retrofitting of already installed cables is also possible.
Our systems are fireproof according to F90, gas- and watertight. We would be pleased to come to you to plan with you and for you the installation of our systems. We will also be happy to carry out the installation for you with our specialist staff.
Cable bushings are intended to protect the cables from mechanical damage such as chafing or edge pressure and to prevent foreign bodies and water from entering the building. In addition, a seal against gases or a partitioning can be required as a fire protection measure. Cable ducts should be permanently leak-proof, even in the presence of pressurized or non-pressurized water, gases or air. Cable ducts can be taken into account as early as the planning phase and the necessary measures such as fire protection in accordance with DIN 4102 or building seals in accordance with DIN 18195 can be reliably planned. Cable bushings are differentiated according to their application and area of use. Essential distinguishing features are:
The novalit-flex wall duct is also intended for house entries into buildings or parts of buildings without basement. The concrete and very abrasion-resistant flexible lining pipe NW 80 mm can be pushed over flexible or bent pipes up to NW 40. A threaded flange is screwed onto this lining pipe on the outside of the building, which is then dowelled in front of the wall. The rubber elastic novalit sealing cover fits on this flange again, which is then clamped by means of the half-shells. The other side of the novalit-flex-pipe is closed with a screw cap (no seal).
- Wall Ducts
In unserem Programm finden Sie: Harting-Stecker und Einsätze, Kabel und Leitungen, Rundsteckverbinder, Sensorleitungen und Stecker, Verschraubungen, Schutzschläuche, Schrumpfschläuche, sowie Kontakte und Werkzeuge.
Aufgrund unseres großen Lagers liefern wir unser komplettes Katalog-Sortiment innerhalb von 24-Stunden. Bis 17Uhr bestellt erhalten Sie die Ware am Folgetag bis 10Uhr ins Haus.
Keinen Mindestauftragswert und keine Mindesbestellmenge, d.h. 1.Stecker oder 1m Kabel morgen früh sind bei uns kein Problem.
Sie erreichen Stecker Express kostenlos unter 0800- 750 2020, oder im Internet unter www.stecker-express.de
- Wall Ducts
Wall Ducts - Manufacturers, Traders & Suppliers
Wall Ducts - Synonyms spellings
Users who searched for Wall Ducts also searched for:- Wall Entrances
- Wall Bushings
How do you rate the information on this page?