Load-Bearing Rollers  Manufacturers, Traders, Suppliers

Coatings of rolls, wheels or rollers are possible with our solid materials Diepothan® and Vulkollan® or with our foamed materials Diepocell® and Vulkocell®.
Due to the good technical characteristics and a broad spectrum of material qualities, we are able to respond very specifically to customer requirements such as high or low damping, wear resistance or even high grip and longevity.
The coating of provided basic bodies is just as possible as the delivery of the completely finished assembly.
Subsequent mechanical processing, such as grinding or applying chamfers or heels can also be carried out by us.
Designs of rolls incl. Material thicknesses or material qualities, as well as contouring are possible at any time by our in-house engineering in close consultation with the customer requirements.

Rolls and roll systems / Ultramarathon Performance
Through our intensive experience gained from different types of production
plants worldwide we provide solutions and products for all application fields
of the continuous casting plant.

No matter if you require guide rollers, light duty or synthetic castors, fork lift wheels, castors for transport equipment, heavy duty castors or pallet truck rollers, the large Blickle standard range with more than 20,000 wheels, swivel and fixed castors ranging from 15 kg to 20 tons offers the best solution for every application.

Tread & Wheel Materials:

• Rubber (Solid Rubber, Thermoplastic Rubber, Elastic Solid Rubber, Soft Rubber)
• Nylon (Polypropylene, Nylon 6, Cast Nylon, Phenolic Resin)
• Injection-Moulded Polyurethane
• Cast Polyurethane (Extrathane®, Softhane®, Besthane®)
• Cast-Iron
• Steel

Bracket materials:

• Nylon
• Steel (Pressed Steel and Welded Steel)
• Stainless Steel

Fitting Options:

• Top Plate Fitting
• Bolt Hole Fitting
• with Threaded Pin
• with Expander Fitting
• with Plug-In Stem

• Machinery and transport equipment of all kinds - operating, laboratory, medical and kitchen equipment - industrial trucks, forklifts, AGVs - intralogistics and internal material supply - plant construction and aircraft maintenance equipment - dining, racking and transport trolleys - mobile scaffolding and waste containers - cleaning and sweeping machines - shop fittings and furniture

- Machinery and transport equipment of all kinds - operating, laboratory, medical and kitchen equipment - industrial trucks, forklifts, AGVs - intralogistics and internal material supply - plant construction and aircraft maintenance equipment - dining, racking and transport trolleys - mobile scaffolding and waste containers - cleaning and sweeping machines - shop fittings and furniture

A carrier roller generally consists of the tube, shaft, and bearing assemblies. In principle, the material and variants of the components for rollers should be carefully selected to meet the specific requirements. What dimensions, weight, and properties does the conveyed material have, and what requirements are placed on the transport system?
the result:

• Roller length
• Tube and shaft dimensions
• Bearings
• Shaft spacing
• Conveying speed
• Choice of material for the carrier roller assemblies
• Selecting the drive element

The bearing, tube, and shaft variants should be selected so that the weakest component is suitable for the loads conveyed. Technical requirements such as electrical conductivity or consideration for ambient conditions such as temperature, humidity, moisture, etc. must also go into the configuration.

We manufacture drive systems and components in serial, speciality and single-piece production. The reliable germanGrip pulley lagging materials and the innovative germanBond adhesives are important components that guarantee optimum solutions.
Coated pulley bottoms and transport sealing – our extra services are always one step ahead of your desires.
Pulleys

• Drive pulleys
• Bend pulleys
• Snub pulleys

Idler and idler sets

• Idler and return idler
• Lateral guide idlers
• Support and impact rings
• Idler frames

Special Products

• Link pulleys
• Special idler
• Deflection discs (Currugated sidewall belts)
• Impact roller

Components

• Drive shafts
• Bend shafts
• Pedestal bearing
• Flange bearing
• Clamping sets

Schulz Stanztechnik has been in existence as a company for more than 50 years, and operating since 1991 from its premises in Halver on behalf of numerous customers at home and abroad. We produce and assemble a large number of products in differing versions on our production facilities covering more than 2,500 m². Our wide range of products presented to you on this website can cope with practically every conceivable task involved in transporting goods. The main products consist of axial deep groove ball bearings, detailed parts and components for systems used in warehousing, materials moving and transport tasks, stampings and stamped bent parts, together with accessories for cable installation.

ROS is the specialist and leading manufacturer of rollers, motor rollers, polydirectional rollers, extension elements and accessories for conveyor systems. Our products are used in many industries such as food, car, automotive, chemicals and pharmaceuticals, wood processing and furniture, packaging, print and paper and the stone industry.
Even our standard range of rollers and elements of conveyor technology covers a whole number of customer needs. And for special requirements, as a developer of individual solutions, we can quickly serve you with customized products. Why not benefit from our many years of experience and discover the ideal conveyor solution for your needs.
At ROS the customer-specific special solution is standard – and this applies from the initial order quantity. You can find an extensive range of standard solutions and spare parts in our online store.