Gear Blanks  Manufacturers, Traders, Suppliers

We from FUCHS Schraubenwerk GmbH are your strong partner for fastener and cold forging technology. We employ about 200 people at two locations in Siegen, Germany. With a product mix of precision parts, specialty fasteners, and standard fasteners, our monthly supplied tonnage totals to 1,000 tons and is composed of a wide spectrum of sophisticated products and corresponding services for the automotive, general industry, construction, chemical, and electric industry sector. Benefit from our production and engineering capabilities on modern multi-stage presses for most economical precision.

Schuler DUROCOMM GmbHSince 1988 your partner for difficult sliding applications, current sliding bearing problems, metal/composite bearing solutions, sliding elements, sliding bearing calculations, special solutions, conversion from metal to composite bearing materials, high-temperature applications, special PEEK material - VaneStar®, development and production.

The SKM Witte Löhmer GmbH delivers parts for conveyor equipment under highest
Quality and Production Standards in combination with lowest production costs.
SKM Witte Loehmer GmbH was founded in 2003 by the union of the companies
SKM Spezialketten and the chain manufacturing of the Witte Loehmer GmbH.
Since more than 90 years Witte-Löhmer produced Chains and Sprockets.
With the connection of this two companies we can ensure that the technical Know How
(particular for casted chains) is available also in future.
Our Product Range:

• pintle chain casted version as per DIN 654 / CSN 023382
• conveyor chains as per DIN 8165 and DIN 8167
• detachable chains as per DIN 686 / CSN 023372
• drop forged chains
• special chains as per drawing
• sprockets
• drive and deviating shafts
• Round link chains and chain shackles
• Elevatorbuckets, Elevatorscrews and Elevatorbelts
• Special Screws as per DIN 2510 or drawing

We deliver our chains to German, European and also Worldwide - for example South Africa, Indonesia, Russia and South America.

With approx. 4,900 employees today, NORD DRIVESYSTEMS has developed, produced and sold drive technology since 1965, and is one of the leading global full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In the 2022 financial year, annual sales amounted to 1 Mrd. €. NORD has 48 subsidiaries in 36 countries and further sales partners in more than 50 countries. They provide technical support, local stocks, assembly centres and customer service. NORD develops and produces a wide range of drive solutions for more than 100 industries, gear units for torques from 10 Nm up to over 282 kNm, supplies electric motors in the power range of 0.12 kW to 1,000 kW, and supplies the required power electronics with frequency inverters of up to 160 kW. Inverter solutions are available both for conventional control cabinet installations as well as for decentralised, fully integrated drive units.With approx. 4,900 employees today, NORD DRIVESYSTEMS has developed, produced and sold drive technology since 1965, and is one of the leading global full-service providers in the industry. In addition to standard drives, NORD delivers application-specific concepts and solutions for special requirements such as energy-saving drives or explosion-protected systems. In the 2022 financial year, annual sales amounted to 1 Mrd. €. NORD has 48 subsidiaries in 36 countries and further sales partners in more than 50 countries. They provide technical support, local stocks, assembly centres and customer service. NORD develops and produces a wide range of drive solutions for more than 100 industries, gear units for torques from 10 Nm up to over 282 kNm, supplies electric motors in the power range of 0.12 kW to 1,000 kW, and supplies the required power electronics with frequency inverters of up to 160 kW. Inverter solutions are available both for conventional control cabinet installations as well as for decentralised, fully integrated drive units.

Since 1980 we have been developing, producing and selling planetary
gearboxes and customer-specific special gearboxes. The whole chain of
value and responsibility from development, through manufacturing, to
assembly is run in-house. The result of this strategy is that we are
able to offer you a complete range of low-backlash planetary gearboxes.

Gear Motion GmbH is a technological center with focus on plastic injection molding, with its own development department. Our core competence is the manufacture of high-precision parts. Specializing in gears and spindles made of plastic and plastic-metal hybrid connections.

Windschiegl Maschinenbau GmbH offers you precisely manufacturered products according to your specifications and wishes. To meet your requirements we have employed highly qualified staff and we use the most modern machinery available on the market.
We primarily produce turned parts, milled parts, ground parts, parts with tooths systems, welded assembly modules, pre-assembled modules as well as complete machinery units or systems as ordered by the customer.
Due to our research and development section we are able to offer our customers specially tailored solutions.
A speciality of our research and development section is the calculation and design of engine parts. One of our specialties is the calculation of cam profiles for vehicle engines; plus we are able to manufacture the products developed by us.
We put special emphasis on the quality of any product developed by our company. Therefore we manage all our processes according to the requirements of the ISO standard "DIN EN ISO 9001:2000".
To guarantee the quality of our products we use state-of-the-art measuring machines and tools.Windschiegl Maschinenbau GmbH offers you precisely manufactured products according to your specifications and wishes. State-of-the-art production machines and highly qualified personnel are available to fulfill your requirements. We primarily manufacture turned parts, milled parts, ground parts, parts with gearing, welded assemblies, fully assembled components, through to complete machines and systems to customer order. We are able to manufacture components in dimensions ranging from 5 mm to 20,000 mm and with a maximum unit weight of 142 tons. As we have our own development department, we can offer our customers tailor-made solutions. A specialty of our development department is the calculation and design of engine parts, in particular the calculation of cam contours on vehicle engines. We are able to manufacture the products we develop in-house. The quality of our products is very important to us. We therefore align our processes with the requirements of DIN EN ISO 9001:2000. State-of-the-art measuring machines are available to ensure product quality.