Filter Systems  Manufacturers, Traders, Suppliers

• Permanent Magnets
• Electro Magnets
• Linear Solenoids
• Holding Solenoids
• Separation Systems

• Electrostatic oil and emulsion mist separator / Electrostatic extraction system for separating oil mist, emulsion mist, oil smoke, welding smoke, fumes, suspended particles, oxide-containing smoke and aerosols.
• Mechanical air filter for separating emulsion mist, oil smoke, vapor, suspended particles, oxide-containing smoke, aerosols, etc.
• Dust filters from simple pocket shaker filters to large cartridge filters.
• Wet separators for problematic dusts, be they sticky, moist, flammable or explosive.
• Filter media for the filtration of impurities from liquids such as grinding emulsion, drilling emulsion, eroding oils, acids, alkalis, etc.
• Customized special systems such as: cyclone separators, wet separators, adapted intake and outlet collectors, activated carbon filters, filter systems for extrusion coating, etc.

Examples for custom constructions

• Equipped shipping containers
• Filter aggregates
• Stream distributors
• Racks
• Components for electro industries
• Components for autmation systems
• Bauteile für Automatisierungssysteme
• Vacuum switches
• Inset sockets
• LED housings
• Housings of all types
• Heat storages
• and much more

The automatic cleaning of the filter saves personnel-intensive service times.

• Housing: 1.4301, 1.4571 or St37 powder-coated
• Filtration during operation from 50 - 350 m³/h (depending on design and scaling)
• Pipe connections: DN25, DN50, DN80, DN100, DN125, DN150, DN200, DN250 Other pipe connections are possible on request.
• Finenesses: 2-500 µm
• Filter areas: 700 cm², 3000 cm², 5000 cm², 7000 cm²,
• required nominal pressure in the system: 1.5-2 bar
• Rinsing: with process water
• maximum operating pressure: 10 bar
• maximum temperature: 110 °C (powder-coated 70°C)
• Control: SIMATIC S7 1200 with touch panel or LOGO
• The filtration process is NOT interrupted.

Sectors:

• Polymer industries
• Ink industries
• Food industries
• Automobile industries
• Laundry facilities
• Aluminium plants
• Pickling plants
• Paper industries
• Tire industries
• Communal and public services
• Chemical industries

Energy-Efficient Extraction Systems
Targeted optimizations can lead to significant savings in both energy and resources in industrial processes. At the same time, efficiency is sustainably improved. As an experienced manufacturer of extraction systems, ABSAUGWERK leverages the full potential of its technology to provide you with economical and future-proof solutions. Our systems are characterized by low flow resistance and maximum performance.

• Industrial dedusters
• Wet seperators
• Fume filters
• Oil mist seperators
• Filter untis
• Filter tower
• Hall extraction
• Extraction cabins
• AHU systems
• Equipment

• System design
• Precise dimensioning
• Minimal air resistance
• Flexible construction
• Optimally designed piping system
• ATEX and fire protection measures
• Flitration system
• High-quality long-life filters
• Cleanable metal mesh filters
• Regular Jet-pulse filter cleaning
• And much more

Harmful emissions are a byproduct of many industrial processes and occur in nearly all industries. To effectively protect employees and machinery while complying with occupational health and safety regulations, reliable extraction is essential. Our extraction systems can be flexibly adapted to industry-specific requirements and individual applications – allowing us to offer tailored solutions for every situation.

• Metal
• Mechanical Engineering
• Food industry
• Building materials
• Medical technology
• Environmental and recycling
• Automotive

With more than 35 years of experience and over 100 international patents, the family-owned and operated company Gneuss has made a name for itself as a supplier of innovative solutions for the plastics processing industry.
In addition to unique technologies, systems and components for plastics processing, Gneuss also offers complete turnkey solutions for the production of high quality sheet, fibres and pellets. Since its foundation in 1983, Gneuss has grown to become a worldwide technology leader for the extrusion of polymers and the reprocessing of all kinds of polymers.
Based in Bad Oeynhausen, Germany, Gneuss is committed to the expectations of products “made in Germany” while serving its customers worldwide. With its daughter company in the USA, offices in Brazil and China, a cooperation partner in Japan and together with representatives worldwide, Gneuss is present throughout the world. The best possible technical support, excellent service and spare parts availability is provided on all five continents. Support is available around the clock via a telephone service hotline. Pilot lines for trials and development work are available at several locations.
Our company philosophy is to work together with you, based on confidence and personal relationships. We are dedicated to providing competent advice and to supporting you with the best know-how and the most modern technology, and to always offer you an optimum filtration solution.

We manufacture spot-welded wire meshes according to your specifications
WDM Deutenberg is a manufacturer for industrial wire meshes according to your individual customer requirements. Basically, our spot-welded wire meshes have
>> Size: 300 x 250 mm to 8,000 x 2,400 mm depending on mesh width and wire diameter
>> Material: bare wire, pre-galvanized wire, galvanized wire, aluminum galvanized wire, stainless steel wire
>> Diameter: 2.0 mm to 18.0 mm
>> Processing options: diverse additions, deformations, cuttings & refinements
The scope of our spot-welded wire meshes is very diverse. They are used in industries such as landscaping, agriculture, engineering, shopfitting, metalworking, food industry, electrical industry, construction industry or retail.
Further information available at www.wdm-deutenberg.com

atech innovations gmbh, based in Gladbeck, Germany, has been involved in the sale of high-quality ceramic membranes for a wide range of industrial applications in the chemical and biotechnology, food and beverage and wastewater treatment/recycling sectors since 1989 and in their development and manufacture since 1992.
In addition to ceramic membranes in various geometries and channel cross-sections, atech also offers associated pressure housings made of various stainless steels and plastics. The designs comply with international standards and also take into account hygiene requirements such as US 3-A Sanitary Standard Design. In addition, atech`s qualified staff and technical facilities are available for services such as pilot plant/filtration tests.
Depending on the requirements of the respective application, atech offers a wide range of different membrane geometries: Mono- and multi-channel membranes with different channel cross-sections, covering the range of ultra- (from 1 kD) and microfiltration (up to 1.2µm).
Due to the extensive product range, atech can supply membrane replacements for many membranes on the market.

We manufacture filter nozzles and drainage systems for
water and waste water treatment.
Our own developments, tool making and production
enable us to quickly and flexibly react
to your requirements.

TEKA - We are "The Air Purifiers"
From a two-man business to a global player
It all started with a little grey box. 25 years ago, Jürgen Kemper and Erwin Telöken
developed and built their first extraction unit for dental and laboratory technology.
With a lot of potential - as the rapid growth of the company showed. Within just a few
years, the two-man business developed into a global player. Today, TEKA Absaug-
und Entsorgungstechnologie GmbH, with around 150 employees in Coesfeld and
Weseke, produces extraction units for the automotive, metal and electrical industries.
TEKA filter units provide clean air for employees at the industrial workplace and help
to protect the environment. The portfolio of the full-range supplier ranges from mobile
and stationary units for source extraction to ventilation solutions for hall air filtration
and complex system solutions for the cutting industry.
Dealer loyalty and customer proximity
Individually tailored to the operational situation, suitable for everyday use, easy to
operate - this credo still applies to TEKA solutions today. "The Air Purifiers" have
always kept their feet firmly on the ground despite continuous growth and have
placed great emphasis on close dealer and customer support. TEKA is regarded in
the industry as a problem solver that intensively responds to the needs of trading
partners and end customers. Individual advice and support are still a top priority in
the digital age. An important role is played here by the company's own
communication centre with training rooms and 1,000 m² of exhibition space where
more than 100 training and further education courses take place annually.
Lived innovation spirit
To this day, the company continues to set trends in ventilation technology with its
new developments. Great importance has always been attached to compliance with
legal standards that protect users from harmful welding fumes and grinding dust right
at the workplace. TEKA was one of the first suppliers to be awarded the W3
certifications according to DIN EN ISO 15012-1 given by the Institute for
Occupational Safety and Health for almost all its mobile and stationary extraction
units.
Health protection is on the rise
The modern air pollution control nowadays covers not only the extraction and the
filtration of polluted process air, but also the constant monitoring of the air quality.
Here TEKA has recognized the signs of the times: With its innovation strategy, the
company is a successful pioneer in the field of Industry 4.0, as evidenced, among
other things, by the Airtracker digital room air monitoring system.