Filtering Technique  Manufacturers, Traders, Suppliers

Filter technology
Shaped filters as pointed sieve, truncated cone sieve, fabric cylinder, perforated plate cylinder, fabric probes, sieve baskets made of metal wire mesh and perforated plate.
-truncated cone sieve; outside perforated plate; inside fabric -
pointed sieve; outside fabric; inside perforated plate -truncated cone
sieves; outside fabric; inside perforated plate - sieve
basket made of stainless steel; wall and bottom made of fabric; flange made of solid
plate - sieve basket with handle; wall made of perforated plate and fabric; bottom, flange and bracket made of solid plate - sieve
basket made of stainless steel; wall and bottom made of fabric; flange made of solid plate

Hundreds of thousands of filters by Filter PROFItlich are permanently operating worldwide. Well-kown customers from various industry sectors have honoured the quality of our products and services with loyalty over decades.
We concentrate on welded steel constructions, that take into consideration the exact demands of customers. The advance for your customers: The construction stays flexible, the piping efforts remain at a minimum, just as the need for houses, valves, compensators and other additional components.

The automatic cleaning of the filter saves personnel-intensive service times.

• Housing: 1.4301, 1.4571 or St37 powder-coated
• Filtration during operation from 50 - 350 m³/h (depending on design and scaling)
• Pipe connections: DN25, DN50, DN80, DN100, DN125, DN150, DN200, DN250 Other pipe connections are possible on request.
• Finenesses: 2-500 µm
• Filter areas: 700 cm², 3000 cm², 5000 cm², 7000 cm²,
• required nominal pressure in the system: 1.5-2 bar
• Rinsing: with process water
• maximum operating pressure: 10 bar
• maximum temperature: 110 °C (powder-coated 70°C)
• Control: SIMATIC S7 1200 with touch panel or LOGO
• The filtration process is NOT interrupted.

Sectors:

• Polymer industries
• Ink industries
• Food industries
• Automobile industries
• Laundry facilities
• Aluminium plants
• Pickling plants
• Paper industries
• Tire industries
• Communal and public services
• Chemical industries

Diffusion dialysis is a membrane separation process used to regenerate acids or bases or to replace special ions in a solution (“anion/cation exchange”).
The process is based on two different fluids flowing through two channels which are separated by a semi-permeable membrane.
In a simplified way, mass transport occurs from concentrated to diluted fluids until the concentration difference has been balanced out. With a selective membrane, certain components can be "separated out" from the concentrated fluid by increasing the resistance for other components.

Cartridge filter systems of the "Dustec" series combine the advantages of gravity-following downflow with a moderate filter load due to large filter surfaces. The design advantages allow a compact housing design. The choice of different filter media, allows the use for dust, smoke, granulate and mist. The differential pressure-dependent compressed air cleaning guarantees a long service life of the filter material. The "Dustec" is designed for recirculation operation. By adding an exhaust air/circulation circuit, it can also be operated as an exhaust air unit.

atech innovations gmbh, based in Gladbeck, Germany, has been involved in the sale of high-quality ceramic membranes for a wide range of industrial applications in the chemical and biotechnology, food and beverage and wastewater treatment/recycling sectors since 1989 and in their development and manufacture since 1992.
In addition to ceramic membranes in various geometries and channel cross-sections, atech also offers associated pressure housings made of various stainless steels and plastics. The designs comply with international standards and also take into account hygiene requirements such as US 3-A Sanitary Standard Design. In addition, atech`s qualified staff and technical facilities are available for services such as pilot plant/filtration tests.
Depending on the requirements of the respective application, atech offers a wide range of different membrane geometries: Mono- and multi-channel membranes with different channel cross-sections, covering the range of ultra- (from 1 kD) and microfiltration (up to 1.2µm).
Due to the extensive product range, atech can supply membrane replacements for many membranes on the market.

TEKA - We are "The Air Purifiers"
From a two-man business to a global player
It all started with a little grey box. 25 years ago, Jürgen Kemper and Erwin Telöken
developed and built their first extraction unit for dental and laboratory technology.
With a lot of potential - as the rapid growth of the company showed. Within just a few
years, the two-man business developed into a global player. Today, TEKA Absaug-
und Entsorgungstechnologie GmbH, with around 150 employees in Coesfeld and
Weseke, produces extraction units for the automotive, metal and electrical industries.
TEKA filter units provide clean air for employees at the industrial workplace and help
to protect the environment. The portfolio of the full-range supplier ranges from mobile
and stationary units for source extraction to ventilation solutions for hall air filtration
and complex system solutions for the cutting industry.
Dealer loyalty and customer proximity
Individually tailored to the operational situation, suitable for everyday use, easy to
operate - this credo still applies to TEKA solutions today. "The Air Purifiers" have
always kept their feet firmly on the ground despite continuous growth and have
placed great emphasis on close dealer and customer support. TEKA is regarded in
the industry as a problem solver that intensively responds to the needs of trading
partners and end customers. Individual advice and support are still a top priority in
the digital age. An important role is played here by the company's own
communication centre with training rooms and 1,000 m² of exhibition space where
more than 100 training and further education courses take place annually.
Lived innovation spirit
To this day, the company continues to set trends in ventilation technology with its
new developments. Great importance has always been attached to compliance with
legal standards that protect users from harmful welding fumes and grinding dust right
at the workplace. TEKA was one of the first suppliers to be awarded the W3
certifications according to DIN EN ISO 15012-1 given by the Institute for
Occupational Safety and Health for almost all its mobile and stationary extraction
units.
Health protection is on the rise
The modern air pollution control nowadays covers not only the extraction and the
filtration of polluted process air, but also the constant monitoring of the air quality.
Here TEKA has recognized the signs of the times: With its innovation strategy, the
company is a successful pioneer in the field of Industry 4.0, as evidenced, among
other things, by the Airtracker digital room air monitoring system.