Modules  Manufacturers, Traders, Suppliers

As a manufacturer of high-quality computers and IT solutions, we at MKC Michels & Kleberhoff Computer GmbH offer a wide range of modules that enable our customers to customize and expand their systems. Our modules are specially tailored to the needs and requirements of our customers and are characterized by their high quality, reliability and performance.
Our extensive range includes memory modules, graphics card modules, processor modules and memory expansion modules that enable our customers to upgrade their systems and get the most out of them. Thanks to our many years of experience and expertise in the field of computer technology, we can offer our customers tailor-made solutions that meet their individual requirements. At MKC Michels & Kleberhoff Computer GmbH, we place great emphasis on innovation and quality in order to always provide our customers with the latest and best technologies.

• Processors: Intel Core i7-10700K, AMD Ryzen 9 5900X
• Memory: 16GB DDR4 RAM
• Graphics cards: NVIDIA GeForce RTX 3080, AMD Radeon RX 6800 XT
• Storage: 1TB NVMe SSD
• Mainboard: ASUS ROG Strix Z490-F, MSI MPG B550 Gaming Edge WiFi
• Operating system: Windows 10 Home
• Ports: USB 3.2 Gen 2, USB-C, HDMI, DisplayPort
• Network: WLAN, Bluetooth 5.1
• Housing: Fractal Design Meshify C, Corsair iCUE 4000X RGB
• Cooling: Water cooling, fan control

• Application areas in the automotive industry
• Application areas in the aerospace industry
• Application areas in medical technology
• Application areas in telecommunications
• Application areas in mechanical engineering
• Application areas in the electronics industry
• Application areas in the energy industry
• Application areas in security technology

C3351 MODBUS-TCP/MODBUS-RTU PLC CONTROLLER (CODESYSV3.5)
Product Feature:
ODOT PLC C-3351 Codesys V3.5
1.Reliable, compact, easy to expansion IO, can support up to 32 I/O modules.
2. It could be applied to multiple industries and scenarios such as mechanical processing equipment, sewage treatment, textile, non-standard automation, etc.
3. Seamless communication with reliable connection. Modbus TCP Server and Modbus TCP client are supported simultaneously.
It supports Modbus RTU master or slave.
4. It is a programmable system that follows the IEC61131-3 international standard. It supports five programming languages such as ladder diagram (LD), instruction list (IL), structured text (ST), function block diagram (CFC/FBD) and Sequential Function Chart (SFC).

Technical Parameters
Hardware Specification
System Power: Nominal 24Vdc, Range-9-36Vdc
Protection: Overcurrent Protection, Reverse Protection: YES
Power Consumption: 110mA@24Vdc
Internal BUS Supply Current: Max.2A@5VDC
Isolation: System Power to Field Power Isolation
Field Power Supply Power Supply: 22~28V(Nominal 24VDC)
Field Power Supply Current: Max. DC 8A
I/O Modules supported: 32 pcs
Wiring: Max.1.5mm²(AWG 16)
Mounting Type: 35mm Size DIN-Rail
Size: 115*51.5*75mm
Weight: 130g
Environment Specification
Operational Temperature: -40~85℃
Operational Humidity: 5%~95% RH(Condensation)
Protection Level: IP20
EtherCAT: Parameter
Protocol: EtherCAT
Process data area: Input Max.1024 Bytes, Output Max.1024 Bytes
Network Interface: 2 RJ45
Speed: 10/100Mbps, MDI/MIDX, Full-Duplex
Max.Bus Legenth: 100m
Technical Parameters
General Parameters
System power supply：22-28VDC（Nominal 24VDC）
Protection：Anti-reverse connection protection
Module consumption：70mA@24Vdc
Internal Bus supply current：Max：2.0A@5VDC
Isolation：system to site power isolation
Field power supply：22-28V（Nominal 24V）
Field supply current：Max. DC 8A
Number of supported I/O modules：32 pcs
Wiring diameter：Max.1.5mm² (AWG 16)
Way to install：35mm DIN rail
Dimension：115 * 65.5 * 75mm
Weight：120g
Environment Parameters
Operating Temperature：-30~70℃
Environment Humidity：5%~95% RH(No Condensation)
Ingress Protection Rating：IP20
Programming Specification
Programming Software：CODESYS SP17
Programming language：IEC 61131-3 (LD, IL, ST, CFC/FBD, SFC)
Maximum State Tasks：5
Bit Instruction Cycle：0.21us
Word Transfer Cycle：0.39us
Floating Point Operation Cycle：0.42us
Program Memory：1MBytes
Data Storage：1MBytes
Power-down Protection Area：3KBytes
RTC：Not Supported
Maximum Expansion Module：32
Modbus Master Max Channel Numbers：10
Modbus Master Command Max Length：
Function Code 1(Read Coils)：2000
Function Code 2(Read Discrete Inputs)：2000
Function Code 3(Read Holding Registers)：125
Function Code 4(Read Input Registers):125
Function Code 15(Write Multiple Coils)：440
Function Code 16(Write Multiple Registers)：27
Function Code 23(Read/Write Multiple Registers)：25+25
Interface Parameters
Interface：2 * RJ45 & 1 * RS485
Network Port Baud Rate：10/100Mbps, Adaptive and full duplex
Network Protocol：Modbus TCP，the default IP of the device is 192.168.0.15
Serial Port Configuration（RS485）：Supports Modbus RTU/ASCII, the baud rate is 2400~115200bps, and supports the parameter configuration of parity code and stop bit
LED indicator：6 LEDs PWR STAT RUN NET IRN IER
Link Parameters
Modbus TCP Client：Max supports for connecting 6 Modbus TCP servers
Modbus TCP Server：Max supports for 6 Modbus TCP clients connected
Modbus RTU Master：Max supports for connecting 5 slave devices
Modbus RTU Slave：Max supports for connecting 1 master device
Technical Parameters
General Parameters
System power supply：22-28VDC（Nominal 24VDC）
Protection：Anti-reverse connection protection
Module consumption：70mA@24Vdc
Internal Bus supply current：Max：2.0A@5VDC
Isolation：system to site power isolation
Field power supply：22-28V（Nominal 24V）
Field supply current：Max. DC 8A
Number of supported I/O modules：32 pcs
Wiring diameter：Max.1.5mm² (AWG 16)
Way to install：35mm DIN rail
Dimension：115 * 65.5 * 75mm
Weight：120g
Environment Parameters
Operating Temperature：-30~70℃
Environment Humidity：5%~95% RH(No Condensation)
Ingress Protection Rating：IP20
Programming Specification
Programming Software：CODESYS SP17
Programming language：IEC 61131-3 (LD, IL, ST, CFC/FBD, SFC)
Maximum State Tasks：5
Bit Instruction Cycle：0.21us
Word Transfer Cycle：0.39us
Floating Point Operation Cycle：0.42us
Program Memory：1MBytes
Data Storage：1MBytes
Power-down Protection Area：3KBytes
RTC：Not Supported
Maximum Expansion Module：32
Modbus Master Max Channel Numbers：10
Modbus Master Command Max Length：
Function Code 1(Read Coils)：2000
Function Code 2(Read Discrete Inputs)：2000
Function Code 3(Read Holding Registers)：125
Function Code 4(Read Input Registers):125
Function Code 15(Write Multiple Coils)：440
Function Code 16(Write Multiple Registers)：27
Function Code 23(Read/Write Multiple Registers)：25+25
Interface Parameters
Interface：2 * RJ45 & 1 * RS485
Network Port Baud Rate：10/100Mbps, Adaptive and full duplex
Network Protocol：Modbus TCP，the default IP of the device is 192.168.0.15
Serial Port Configuration（RS485）：Supports Modbus RTU/ASCII, the baud rate is 2400~115200bps, and supports the parameter configuration of parity code and stop bit
LED indicator：6 LEDs PWR STAT RUN NET IRN IER
Link Parameters
Modbus TCP Client：Max supports for connecting 6 Modbus TCP servers
Modbus TCP Server：Max supports for 6 Modbus TCP clients connected
Modbus RTU Master：Max supports for connecting 5 slave devices
Modbus RTU Slave：Max supports for connecting 1 master device

Applied for industrial automation area related for control system and data collection solutions.

Modules, also known as component, is a collection of program statements that can be individually named and independently complete certain functions (that is, the collection of program code and data structure).

It has two basic characteristics: external characteristics and internal characteristics. External characteristics refer to the interface between the module and the external environment (that is, the way other modules or programs call the module, including input and output parameters, referenced global variables) and the function of the module; Internal characteristics refer to the characteristics of the internal environment of the module (that is, the local data and program code of the module).
There are various types of modules, such as unit operation module (heat exchanger, distillation tower, compressor, etc.), calculation method module (accelerated convergence algorithm, optimization algorithm, etc.), physical and chemical properties module (vapor-liquid phase equilibrium calculation, enthalpy calculation, etc.), etc.