28 companies for Drawing Presses ✓ B2B manufacturers, distributors & suppliers from 4 countries ✓ With special service for fast information and prices ✓
Filter:
About us
Show more Voegtle Service is international engaged with purchase and resale of used presses and coil lines for metal forming for more than 70 years.
Established was the company by Albert Voegtle of an engineering office in Göppingen. Over time, the capacities of the warehouse were constantly increased. The head office is in Eislingen. We are a member of the Schuler Group since 1999.
Voegtle Service – the used choice quality has an established international reputation in the marketing purchase and resale of used presses and coil lines. Our company permanently stores about 400 of mechanical and hydraulic presses on 10.000sqm storage area. We furthermore offer feeding devices such as coilers, roller levelers, feed units and coil lines.
In addition, we have many years of experience repairing, servicing, and modernization of mechanical as well as hydraulic presses. Capabilities also include specially customized machines and accessories – including, if required, commission of the equipment at the production site.
Please note our data protection declaration
Established was the company by Albert Voegtle of an engineering office in Göppingen. Over time, the capacities of the warehouse were constantly increased. The head office is in Eislingen. We are a member of the Schuler Group since 1999.
Voegtle Service – the used choice quality has an established international reputation in the marketing purchase and resale of used presses and coil lines. Our company permanently stores about 400 of mechanical and hydraulic presses on 10.000sqm storage area. We furthermore offer feeding devices such as coilers, roller levelers, feed units and coil lines.
In addition, we have many years of experience repairing, servicing, and modernization of mechanical as well as hydraulic presses. Capabilities also include specially customized machines and accessories – including, if required, commission of the equipment at the production site.
Please note our data protection declaration
73230 Kirchheim, Germany S. DUNKES GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Drawing Presses | Presses | Double Stand Pressures
- Drawing Presses | Presses | Sheet Metal Perforating Press
85716 Unterschleißheim/München, Germany Amann Werkzeugmaschinen GmbH Trader ✓
Company Profile Send enquiry
- Drawing Presses | Presses | Double Stand Pressures
57413 Finnentrop, Germany Hengstebeck + Eich GmbH & Co. Maschinenbau Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Drawing Presses | Presses | Double Stand Pressures
76829 Landau, Germany WICKERT MASCHINENBAU GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Drawing Presses | Presses | Double Stand Pressures
58256 Ennepetal, Germany Exner Pressentechnologie GmbH Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Drawing Presses | Presses | Double Column Drawing Press
- Drawing Presses | Presses | Double Stand Pressures
73054 Eislingen, Germany Achim Frainer Maschinenhandel GmbH Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Drawing Presses | Presses | Double Stand Pressures
9642 Ebnat-Kappel, Switzerland Alex Neher AG Manufacturer ✓ Service provider ✓
Company Profile Send enquiry
- Drawing Presses | Presses | Metal Presses
66440 Blieskastel, Germany ATM Deutschland Maschinen & Werkzeuge Vertriebs GmbH
Company Profile Send enquiry
- Drawing Presses | Eccentric Presses | Metal Presses
25355 Barmstedt, Germany BIBRA Biagosch and Brandau Germany GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
About us
Show more BIBRA is an experienced manufacturer and supplier of machineries and homemade toolings for the metal packaging industry worldwide. Our customers use our machines to produce all types of lids and ends for round and nonround products, deep drawn 2-pieces and DRD cans, AE-bottoms as well as twist off- and lug caps. Founded in 1889, BIBRA is headquartered in Barmstedt near Hamburg, Germany.
We can rely on more than 125 years of experience in the packaging industry and several decades of selling can making machines before manufacturing on our own for more than 50 years now. Our tooling department benefits of more than 40 years of experience in designing, constructing and manufacturing dies and toolings for all kind of cutting-, drawing- and forming dies.
In 1999 we moved our tooling department to Barmstedt and in 2009 our oven department followed. Herewith we finished an important mission to assemble all departments under one roof, shortening communication channels, transportation and improve quality control. With the decision to manufacture our own O-frame presses in 2011 we are able to build complete automatic sheet-feed press lines with its backend under one roof.
Our manufacturing range consists of all types of presses and back-end machines such as curlers, lining machines, industrial ovens, rollforming machines and bodymakers (lock-seaming). Additionally, BIBRA is one of the only companies being able to manufacture their own stamping dies and toolings for their machines and others.
Our international success is guaranteed by placing the customer in the centre of our attention. Combining quality, flexibility and individual focus is something that you deserve and that you can expect from us.
We can rely on more than 125 years of experience in the packaging industry and several decades of selling can making machines before manufacturing on our own for more than 50 years now. Our tooling department benefits of more than 40 years of experience in designing, constructing and manufacturing dies and toolings for all kind of cutting-, drawing- and forming dies.
In 1999 we moved our tooling department to Barmstedt and in 2009 our oven department followed. Herewith we finished an important mission to assemble all departments under one roof, shortening communication channels, transportation and improve quality control. With the decision to manufacture our own O-frame presses in 2011 we are able to build complete automatic sheet-feed press lines with its backend under one roof.
Our manufacturing range consists of all types of presses and back-end machines such as curlers, lining machines, industrial ovens, rollforming machines and bodymakers (lock-seaming). Additionally, BIBRA is one of the only companies being able to manufacture their own stamping dies and toolings for their machines and others.
Our international success is guaranteed by placing the customer in the centre of our attention. Combining quality, flexibility and individual focus is something that you deserve and that you can expect from us.
- Drawing Presses | Presses | Eccentric Presses
74150 Marigny-Saint-Marcel, France EMG PRESSE ETS LONG SAS Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Drawing Presses | Printing Presses | Mechanical Presses
- Drawing Presses | Presses | Double Stand Pressures
- Drawing Presses | Presses | Metal Presses
About us
Show more HIDRALMAC is one of the largest manufacturers of PRESSES, PRESS BRAKES, and SHEARS, located in Araraquara city, state of Sao Paulo, where there are two units with over 40 thousand m² of total area.
In 2015 the company consolidated its international actuation when it initiated a Joint Venture with its home office in Gelsenkirchen – Germany, opening its first international unit dedicated to selling equipment throughout Europe, HIDRALMAC Europe – Vertriebs – und Servicestützpunkt UG.
HIDRALMAC has been in this market for 21 years and it has produced over 4 thousand machines spread out through Latin America and Europe, they are built in series or customized. In 2003, the precursor of the double C-Frame press was manufactured, which became the company’s flagship and a great innovation in this machine sector.
In July 2014, the company began its professionalizing process by hiring its first CEO, and the creation of the Administrative Board of Directors, this phase optimized the production processes, reducing costs of the product while increasing its quality, adding improved benefits to its customers.
HIDRALMAC machines comply with the NR-12 requisites, imbued with quality and technology, as well as the best cost-benefit ratio on the market.
HIDRALMAC has a staff of engineers and developers who are highly qualified to supply the best services, providing not only solutions, but innovations to this market. The company actively participates in national and international trade shows, and promotes its Open House to open its doors to its customers, so they can know firsthand the latest and state-of-the-art technology in the machinery market.
In 2015 the company consolidated its international actuation when it initiated a Joint Venture with its home office in Gelsenkirchen – Germany, opening its first international unit dedicated to selling equipment throughout Europe, HIDRALMAC Europe – Vertriebs – und Servicestützpunkt UG.
HIDRALMAC has been in this market for 21 years and it has produced over 4 thousand machines spread out through Latin America and Europe, they are built in series or customized. In 2003, the precursor of the double C-Frame press was manufactured, which became the company’s flagship and a great innovation in this machine sector.
In July 2014, the company began its professionalizing process by hiring its first CEO, and the creation of the Administrative Board of Directors, this phase optimized the production processes, reducing costs of the product while increasing its quality, adding improved benefits to its customers.
HIDRALMAC machines comply with the NR-12 requisites, imbued with quality and technology, as well as the best cost-benefit ratio on the market.
HIDRALMAC has a staff of engineers and developers who are highly qualified to supply the best services, providing not only solutions, but innovations to this market. The company actively participates in national and international trade shows, and promotes its Open House to open its doors to its customers, so they can know firsthand the latest and state-of-the-art technology in the machinery market.
74214 Schöntal-Berlichingen, Germany LTI-Metalltechnik GmbH Manufacturer ✓ Service provider ✓
Company Profile Send enquiry
- Drawing Presses | Punching Presses | Forming Press
- Drawing Presses | Presses | Double Stand Pressures
- Drawing Presses | Presses | Double Stand Pressures
121001 Faridabad, India SARB PRESSES PVT LTD Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Drawing Presses | Presses
79539 Lörrach, Germany Ulbrich GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
About us
Show more Ulbrich started abaout 60 years ago with the production of hydraulic components. Later on we developed and produced hydraulic presses and special hydraulic machinery.
Today Ulbrich is a leading manufacturer in force- and positioning monitoring assembly presses as well as test presses.
Highly qualified technicians solve your questions and select the most qualified solution for your problem! ULBRICH presses enable you to perform assembling and testing functions with your demanding quality.
Our international alignment as well as the combination of creative and intelligent solutions are the basis for a successful and future-oriented cooperation.
Today Ulbrich is a leading manufacturer in force- and positioning monitoring assembly presses as well as test presses.
Highly qualified technicians solve your questions and select the most qualified solution for your problem! ULBRICH presses enable you to perform assembling and testing functions with your demanding quality.
Our international alignment as well as the combination of creative and intelligent solutions are the basis for a successful and future-oriented cooperation.
76703 Kraichtal-Gochsheim, Germany Winter-Pressen GmbH Maschinenbau für hydraulische Pressen Manufacturer ✓ Trader ✓ Service provider ✓
Company Profile Send enquiry
- Drawing Presses | Column Presses | Hydraulic Presses
Lemacher Hydraulik Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- HYDROQUICK hydraulic cylinder SYSTEM - Packaging machines Punching tools for the automotive industry Embossing tools for various a...
- Servo hydraulic press HT-0160 - Servo hydraulic presses for Punching, punching, bending, flanging, drawing, embossing, riveting, e...
Areas of application
Show more Industries
Superior tools. For outstanding professionals.
Enerpac is a global leader in high-pressure hydraulic tools, controlled force products, portable machinery and solutions for precise positioning of heavy loads. A leading innovator with a 110-year history, Enerpac has helped move and maintain some of the largest structures on the planet. When safety and precision are important, top professionals in industries such as aerospace, infrastructure, manufacturing, mining, oil and gas and power generation rely on Enerpac for high-quality tools, services and solutions.
aerospace
Infrastructure
Production
Mining
Oil and Gas
Power generation
About us
Show more ProdEq Group - Partner of the Industry.
Wholesale trading of metalworking machinery. We sell and buy:
Our international sales network provides access to the global markets of used / secondhand machinery.
Online Machinery Directory:Search and find your desired equipment and machine tool (CNC or non-CNC) in our online directory. All machines for sale are published with comprehensive information.
Large projects - small projects:We realize auctions and liquidations and carry out the sales of your surplus equipment. Please contact us upon any upcoming sales of surplus assets. We trade single machines as well as complete industrial plants.
Expertise:Regardlessly if you sell or buy used machines or equipment. Base your selling decision on our appraisal and your buying decision on our technical advice.
More than secondhand:We also trade a selected portfolio of new equipment, just ask us.
Trade and service:Ask for after sales services as disassembly, overhauls, transportation, import & export, and financing.
Wholesale trading of metalworking machinery. We sell and buy:
- machine tools
- metal manufacturing machinery
- used industrial equipment
- complete plants
Our international sales network provides access to the global markets of used / secondhand machinery.
Online Machinery Directory:Search and find your desired equipment and machine tool (CNC or non-CNC) in our online directory. All machines for sale are published with comprehensive information.
Large projects - small projects:We realize auctions and liquidations and carry out the sales of your surplus equipment. Please contact us upon any upcoming sales of surplus assets. We trade single machines as well as complete industrial plants.
Expertise:Regardlessly if you sell or buy used machines or equipment. Base your selling decision on our appraisal and your buying decision on our technical advice.
More than secondhand:We also trade a selected portfolio of new equipment, just ask us.
Trade and service:Ask for after sales services as disassembly, overhauls, transportation, import & export, and financing.
LASCO Umformtechnik GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
Description
Punch and draw press
VPZ
The hydraulic press VPZ is a combined piercing and drawing press specially designed for hot and cold extrusion, ironing and expanding of long rotationally symmetrical bodies. Typical applications are the production of axle tubes, tool joints and gas cylinders.
Technical data
Show more Special features:
- Particularly rigid press frame
- Press head piece designed as an oil tank with head plate to accommodate the compact press drive
- High press speeds
- Via optimally dimensioned wedge strips, continuously adjustable ram guides that guarantee high accuracy even with off-centre loads
- Depending on the press size and speed, one or more adjustable axial piston pumps as submersible pumps on the head plate
- Servo-hydraulic direct drive alternative equipped with gear pumps or axial piston pumps
- Press cylinders and press pistons in forged design
- Fully automatic workpiece manipulation
- Integrated tool maintenance system with combined internal and external cooling of the tools
- Powerful programmable logic controller with operator guidance, product data management and remote diagnosis modem
performance dimensions: Press forces of 5.000 - 40,000 kN.
- Drawing Presses | Presses | Presses for The Manufacture of Formed Parts
- Drawing Presses
- Drawing Presses | Double Stand Pressures | Eccentric Presses
Drawing Presses - Manufacturers, Traders & Suppliers
If your company is short of time and needs more information and prices in a timely manner, please use the special service form on our result's page.
IndustryStock searches for your company the suitable manufacturers, dealers or service providers for Drawing Presses and sends your mail immediately to these companies.
Are you looking for Drawing Presses?
Are you looking for Drawing Presses. IndustryStock's product and service search engine will not only help you find relevant results for Drawing Presses but also related products and services. All contact information of listed Drawing Presses manufacturers, traders, suppliers and dealers are freely available to all users.
How do you rate the information on this page?
27 Reviews 92%