Escape Way Markings  Manufacturers, Traders, Suppliers

Special markings by means of coloured warning and safety markings for escape and rescue routes as well as restricted areas for the instruction on danger spots, conductive orientation markings on flight operation sites, cycle paths and footpaths and marking of heliports are often indispensable due to valid safety regulations.

These high-performance marking materials also meet the highest requirements for bond strength and wear resistance to mechanical and chemical stress, are free of toxic substances and flame-retardant, and are therefore suitable for application to almost all surfaces.

• Floor markings
• Photoluminescent Floor Marking
• Color Coated floor markings

Safety-Floor warning marking film SGLNL consists of a monomeric calendered vinyl film and siliconized masking paper on the reverse side. Due to the strongly adhesive acrylate adhesive, this film is especially suitable for difficult substrates. Of course, the film is available in various colour combinations.
For use in floor areas we recommend our Safety-Floor floor marking systems or Safety-Floor anti-slip warning markings with special protective laminate and anti-slip surface.

Colour
black-fluor-yellow right and left striped
Luminance (DIN
67510-1) 150 mcd. After 10 minutes.
Thickness
approx. 0,1 mm
Material
Vinyl
Weight
approx. 300 g/m²
Adhesive
Permanent acrylic adhesive
Adhesive strength according
to FINAT 1 after 24h 15 N/25 mm; after 72 h 22 N/25 mm
Temperature resistance
-20 to + 60 degrees
Dimensional stability (DIN 2768)
Shrinkage within tolerance class V
UV resistance
Good within Central European climate zones
Chemical resistance (72 h exposure)
Against oil, lubricants, aliphatic solvents, motor oils, heptane, kerosene,
JP-4 Fuels

Suitable for almost any surface.