Testing of Materials  Manufacturers, Traders, Suppliers

As a medium-sized company, we adapt to the special requirements of our customers. In the field of materials testing, you benefit from state-of-the-art testing technology and comprehensive expertise - and can rely on short decision-making paths. With passion and great care we lead the joint project to success. Our certified service technicians have proven experience in all areas of quality assurance and materials testing.

Non-destructive material testing in our own test centre or directly at your premises
Our spectrum ranges from incoming and outgoing inspections and checks of dimensional accuracy to quality assurance accompanying series production and special test procedures.
Inspections

• Construction and welding seam monitoring
• Plant inspections
• Testing of piping systems

Testing systems - Accredited according to 17025:2005

• X-ray [RT]Mobile X-ray systems and isotopes are equipped for every application. There is also a large X-ray bunker available.
• Ultrasound and Phased Array [UT]With the most modern phased array technology, we also inspect your parts on site.
• crack detection [PT/MT]For this purpose, electromagnetic testing devices - direct and alternating current are used (test bench, yoke magnet). For the PT-testing of mass-produced parts a self-designed system is available.
• Visual control [VT]The data from the endoscope can be stored directly on the laptop.
• Leak test / leakage test [LT]The complete equipment for helium test, leakage tests can be carried out at our factory as well as at your site.
• Spectral analysis and confusion check [PMI]With the most modern technology we can carry out material determination and analysis.
• Mobile Hardness Measurement [HT]
• ferrite measurement [FT]
• Roughness measurement [Ra]Roughness measurement on material and weld seam via ferrite scopes.

• Wall thickness determinationWall thickness determination
• coating thickness measurementLayer thickness measurement via ultrasound

testing systems:

• X-ray [RT]: Mobile X-ray systems and isotopes are equipped for every application. In addition, a large X-ray bunker is available. strong>

• Sample production With the help of band sawing, milling and turning machines as well as a water jet system, we have the possibility to produce all necessary samples in accordance with standards from the most varied components / castings.
• Mechanical-technological testing

• Tensile test at room temperature, and up to +800°C
• notched bar impact test up to -196°C according to DIN EN 10045-1, ISO 148
• mobile hardness test
• bending test
• Weld bending-on test
• compression test

Metallographic inspections

• structural assessment
• Graphite evaluation according to ISO 945 / ASTM A247 / VDG P441
• Weld seam evaluation and measurement incl. Hardness test
• Coating thickness measurement
• Determination of the degree of purity
• Grain size determination
• Micro hardness measurement from HV0.05 to HV1 (determination of the nitriding hardness depth, case depth, ...)
• Preparation of structural impressions by means of replica technique at your premises
• Baumann imprint for determining the sulfur distribution

Chemical testing

• Spectral analyses (Fe-, Al-, and Ni-matrix)
• mobile mix-up test (XRF analysis)
• corrosion investigations
• environmental testing (z.B. Salt spray test, constant climate test)

non-destructive testing

• radiographic testing by means of

• 450kV fluoroscopic equipment (stationary)
• mobile X-ray equipment (up to 300kV)
• mobile isotope equipment (Ir 192, Se 75 and on request Co 60)

Ultrasonic testingSurface crack detection (magnetic particle and dye penetrant methods)Visual inspections

In addition we offer

• Assessment of damage cases
• Preparation of welding instructions
• Material and welding technology consulting
• ..../li>/li>/ul>