Temperature Measuring Tape  Manufacturers, Traders, Suppliers

M series strain gauges have been specially developed for high resistance to alternating loads at increased strain levels and high temperatures up to 300 °C. These are foil strain gauges with measuring grids made of a special nickel-chromium alloy. 
HBM offers this special strain gauge with various geometries, measuring grid lengths and temperature response matching
New materials offering high strength such as fiber composites pose a major challenge for strain gauges used for measurements. In particular when pushing components to their mechanical limit of performance. Situations may arise where a strain gauge subjected to alternating loads at increased load levels is weakened and fails earlier than the component under test. The M series has been specially developed for high resistance to alternating loads and allows for testing of materials featuring high strength.
LM1: Linear strain gauge with one measuring grid for strain measurements in one direction.
TM1: T rosette with two measuring grids arranged at an angle of 90° to each other. For measuring tensile and compressive stress.
TM9: Stacked T rosette with two measuring grids arranged at an angle of 90° to eacht other. For measuring tensile and compressive stress.
XM4: V-shaped strain gauge with two measuring grids arranged at an angle of ±45°. For determining torsion and shear stress.
RM8: Rectangular rosette with three measuring grids arranged at angles of 0°/45°/90°. Biaxial stress state with unknown principal stress directions.
RM9: Stacked rosette with three measuring grids arranged at angles of 0°/45°/90°. Biaxial stress state with unknown principal stress directions.