Pressure Measuring Transducers  Manufacturers, Traders, Suppliers

Pressure sensors (also known as pressure cans, pressure load cells or pressure transmitters) differ, apart from the design and the output signal, mainly in the type of reference pressure for pressure measurement: here there are pressure sensors for relative pressure, absolute pressure and differential pressure transducers.
In a pressure sensor for relative pressure, the back of the sensor element is exposed to the air pressure surrounding us. In a typical setup, a small tube leads from the back of the sensor to the plug or through the connection cable. These pressure sensors have the advantage that fluctuations in air pressure are not reflected in a fluctuation of the output signal.
The pressure sensor for absolute pressure has a small chamber on the back of the sensor membrane which is completely evacuated, i.e. the chamber is 0 bar absolute. These pressure sensors show the current air pressure, which is typically between 950 and 1050 mbar, as long as no measuring pressure is present. Changes in air pressure (e.g. due to a rising high or low) therefore lead to a change in the measuring signal without changing the actual pressure value. A special type of absolute pressure sensors are barometers, which measure the ambient air pressure very precisely. A special form of the pressure sensor is the so called sealed gauge version. Here, the reference chamber is sealed tightly at approx. 1000 mbar. These pressure sensors are mainly used for measuring ranges >10 bar. By closing the reference chamber, it is prevented that e.g. aggressive gases can penetrate into the reference chamber and cause corrosion there.
Another special form of pressure sensors are so-called differential pressure sensors or pressure transducers. Here the back of the sensor membrane is mechanically constructed in such a way that it can be used as an independent pressure connection for pressure measurement. A pressure sensor (pressure cell or pressure load cell) in this version therefore indicates zero at the same pressure on the input and reference sides. Differential pressure sensors differ substantially in their mechanical construction. Here there are simple designs which, for example, only allow dry gases for the reference side or also high-quality pressure transmitters which allow an overload (even on one side) of more than 200 bar at a small nominal measuring range of 35 mbar.
Pressure transmitters often have a very robust mechanical design and have a 4...20 mA output signal which is common in process measurement technology.

KROHNE is a global manufacturer and provider of instrumentation, measurement solutions and services. Founded in 1921 and headquartered in Duisburg, Germany, we offer extensive application knowledge and local contacts for instrumentation projects in over 100 countries. KROHNE stands for innovation and high quality products as one of the market leaders in the process industry.
KROHNE specializes in process measurement – from field instrumentation to system solutions – and is a full-service provider for flow, level, pressure, temperature and process analytics products, accompanied by a broad range of services. We have proven experience working with many customers across most industries, including but not limited to chemical, oil & gas, food & beverage, water & wastewater, power generation and distribution, marine, as well as mechanical and plant engineering.
Today, KROHNE employs more than 4,000 people, operates 15 production facilities and owns 44 companies worldwide while remaining an independent, family-owned company. Our aim is to provide the right measurement solutions for our customers’ process measurement applications. We achieve this by manufacturing innovative, reliable, high-quality products and services, employing qualified and motivated people and maintaining long-term, reliable partnerships with our business partners.

For years CS Instruments has been one of the worldwide leading manufacturers of measuring technology for compressed air and gases. Long-term experience in production, supply and drying of compressed air contributes to research, development and production of innovative portable and stationary measuring instruments.
As a result we offer field proven and practicable measuring instruments for compressed air like e. g.: Dew point meters, pressure dew point meters for refrigeration and adsorption dryers (according to ISO 8573), compressed air counters, consumption counters for compressed air and gases, flow meters, leakage measuring instruments, leak detectors and mobile analysers for compressed air stations.

Pressure transducer is a device or device that can sense the pressure signal and convert the pressure signal into usable output electrical signal according to certain rules.
XIDIBEI have many types pressure transducers according to their applications, general pressure transducer, industrial pressure transducer, HVAC transducers, level measurement, differential measurement and etc.

Output analog data

It is the most commonly used sensor in industrial practice. It is widely used in various industrial automation environments, including water conservancy and hydropower, railway transportation, intelligent buildings, production automation, aerospace, military, petrochemical, oil wells, electric power, ships, machine tools, pipelines and many other industries.