14 companies for ATEX Pumps ✓ B2B manufacturers, distributors & suppliers from 4 countries ✓ With special service for fast information and prices ✓
Filter:
85521 Ottobrunn, Germany Dr. Jessberger GmbH Manufacturer ✓ Trader ✓ Service provider ✓
- Drum pump set with air motor JP-AIR 2 for flammable media
- Drum pump set with air motor JP-AIR 3 for flammable media
- Drum pump set for highly flammable liquids - JP-400 EX-protected - Complete drum pump set for flammable media - JP-400 EX-protecte...
- Drum pump set with electric motor JP-480 SS for flammable media - Drum pump set for gasoline, solvents, acetone, alcohol - JP-480 ...
- Drum pump sets for flammable media - Drum pump sets (stainless steel) for flammable media perfect helpers for fast and safe fillin...
Description
Show more Drum pump from JESSBERGER is suitable for pumping low-viscosity media such as acids, alkalis and cleaning agents (with pumping unit made of polypropylene), highly aggressive chemicals (with pumping unit made of PVDF), mineral oil products up to 1,000 mPas (with pumping unit made of aluminum) or flammable media as well as foodstuffs (with pumping unit made of stainless steel 1.4571).
25495 Kummerfeld, Germany Jung Process Systems GmbH Manufacturer ✓ Supplier ✓ Service provider ✓
- CHEMSPIN ES screw pump - Screw pump for high viscosities
Description
Show more Equipment features:
- Pressure-resistant encapsulated motors with speed control
- Monitoring of surface temperature by PT 100 sensors for housing and bearing bracket
- Monitored flushing system for seals
- Dry and overflow monitoring possible
- Avoidance of breakdown or spark suppression of couplings due to operation in oil bath
- Non-sparking contact protection
- Ground connections and potential equalization
Technical parameters*:
Sizes:
CHEMSPIN 50, 70,90,105 125
Max. Delivery volume:
20 to 300 cubic meters the hour
Max. Delivery pressure:
20 to 35 bar
Max. Solids content:
16 to 46 mm
Viscosity:
0.5 to 1,000,000 mPas
Suction capacity:
NPSHr > 0.5 m, suction lift up to 9 m possible
Pumping temperature:
-10 to 180 °C, higher values on request
Shaft seal:
- Single mechanical seal
- Double-acting mechanical seal
- Mechanical seal with knife edge for sticky media
- single, dry-running lip seal
Drive systems:
- Three-phase motor
- Gear motor
- Servo motor
- optional hygienic design
76275 Ettlingen, Germany SCHMITT - Kreiselpumpen GmbH & Co. KG Manufacturer ✓ Supplier ✓ Service provider ✓
About us
Show more Since 1964, the SCHMITT has been one of the leading suppliers for highly specialized industrial pumps for corrosive, hazardous and highly pure media for volume flow rates up to 580 l/min [35 m3/h] [150 US-gpm] and delivery heads up to 40 m [131 ft].
Quality, Flexibility and Competent Service are the principles that have governed our work for over 40 years.
The SCHMITT-Centrifugal Pump company sells products directly from the headquarters in Ettlingen, south of Karlsruhe, Germany, and throughout several countries through international distribution partners.
Quality, Flexibility and Competent Service are the principles that have governed our work for over 40 years.
The SCHMITT-Centrifugal Pump company sells products directly from the headquarters in Ettlingen, south of Karlsruhe, Germany, and throughout several countries through international distribution partners.
58454 Witten, Germany KAMAT GmbH & Co. KG Manufacturer ✓ Trader ✓
- High pressure units - We create high-pressure units with high-pressure pumps and a wide range of components. We accompany our cust...
- High pressure plunger pump - Discover our versatile plunger high-pressure pumps with power from 15 kW/2000 bar to 1500 kW/3500 bar...
ISO
Show more ISO 9001:2015
Areas of application
Show more For decades SAWA pumps have been meeting the highest demands. They are characterised by their particularly gentle delivery, quiet operation and durability against aggressive or abrasive media. They set the benchmark in numerous industries in terms of lifetime and ease of maintenance.
- Food industry
- Beverage industry
- Pharmaceutical industry
- Chemicals and industry
- Feed industry
1763 Granges-Paccot, Switzerland ADERO AG Pump Systems Trader ✓ Supplier ✓
Company Profile Send enquiry
- ATEX Pumps
21079 Hamburg, Germany Dudek Pumpen GmbH & Co. KG Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- ATEX Pumps | Explosion Protected Pumps
32312 Lübbecke, Germany JEMA Tech GmbH & Co. KG Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- ATEX Pumps | Explosion Protected Pumps
37589 Kalefeld, Germany Kurt Maier Motor-Press GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
About us
Show more The company Kurt Maier Motor-Press GmbH was established in 1979. Our expanding company has production centres in Germany and Southern Europe.
We sell and supply to our customers standard components for electric motors in frame size IEC 56 up to IEC 400, but also components made in accordance to our customer´s requirements.
Accessory parts are stator empty casings, endshields, flanges and terminal boxes of aluminium or cast-iron. Further ventilation fans, radialblowers, stator- and rotorpacks and accessories for the motor manufacturing.
Further products are forced ventilation units for permanent cooling of electric motors, incremental Encoder as were flameproof motors from Cemp, FPM (F&G), Elprom and RAEL.
The aim of our company´s policy is to meet the steadily increasing demands of technology and quality.
Among our customers are well-known manufacturers of:
•Electric motors and geared motors
•Pumps
•Fans, blowers and ventilation fans
•Drive engineering
•Armature rewinders and repair shops
•Wholesalers of components
We sell and supply to our customers standard components for electric motors in frame size IEC 56 up to IEC 400, but also components made in accordance to our customer´s requirements.
Accessory parts are stator empty casings, endshields, flanges and terminal boxes of aluminium or cast-iron. Further ventilation fans, radialblowers, stator- and rotorpacks and accessories for the motor manufacturing.
Further products are forced ventilation units for permanent cooling of electric motors, incremental Encoder as were flameproof motors from Cemp, FPM (F&G), Elprom and RAEL.
The aim of our company´s policy is to meet the steadily increasing demands of technology and quality.
Among our customers are well-known manufacturers of:
•Electric motors and geared motors
•Pumps
•Fans, blowers and ventilation fans
•Drive engineering
•Armature rewinders and repair shops
•Wholesalers of components
About us
Show more SAMOA is a leading European manufacturer of Pumps & Systems for complex fluids and one of the most important worldwide.
Our products are mainly used for lubrication, fluid processing (transferring, dispensing, and dosing), coatings & paints treatments, appliance of high viscosity fluids, and horizontal signaling.
SAMOA designs, develops, and manufactures lubrication equipment, industrial air operated piston pumps, air operated double diaphragm pumps, spraying systems and extrusion units.
Our products are mainly used for lubrication, fluid processing (transferring, dispensing, and dosing), coatings & paints treatments, appliance of high viscosity fluids, and horizontal signaling.
SAMOA designs, develops, and manufactures lubrication equipment, industrial air operated piston pumps, air operated double diaphragm pumps, spraying systems and extrusion units.
Spitznas Maschinenfabrik GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
About us
After its foundation in 1904 by Mr. Ferdinand Spitznas - the inventor of the compressed air vane motor - our company developed into the main supplier of compressed air-driven tools for the German mining industry.
About us
Show more MUNSCH has a longstanding tradition as an innovative manufacturer of non-metallic pumps for aggressive and abrasive service environments. Drawing on decades of experience in developing pumping solutions, we are your reliable partner whenever it comes to pumping problematic fluids.
Our manufacturing operations have been certified to ISO 9000 pp., version 1994, since the first introduction of this standard series.
Our manufacturing operations have been certified to ISO 9000 pp., version 1994, since the first introduction of this standard series.
About us
Show more MAPE CZ s.r.o. company deals with the construction and production of MAPE centrifugal sludge and slurry pumps, following the traditions of our production, which dates back to the early sixties of the last century. With the development of uranium ore mining, it was necessary to solve the transportation of the concentrated sulfuric acid solution in the operation of the uranium chemical treatment plants. In addition to the mass production of pumps, the company deals with the development and specific requirements and wishes of our customers. We design technical solutions for pumping systems, including calculations. The pumps have found application in other industries, namely sewage treatment plants, energy industry - desulphurisation, transport of slag from coal-fired power plants, transport of iron ore in iron works, chemical plants and transport of substances with ph of 1 – 12. We also specialize in dredge pumps, which transport sand by wet means of transport and in mining mineral raw materials and their processing.
MAPE CZ s.r.o. deals with the construction and production of mining equipment that was
intended for uranium mines. Among these devices are the SVE 700 scraper crane, the tipper of mine carts – BV 1, roll grates, switchgear and changeovers.
MAPE CZ s.r.o. deals with the construction and production of mining equipment that was
intended for uranium mines. Among these devices are the SVE 700 scraper crane, the tipper of mine carts – BV 1, roll grates, switchgear and changeovers.
ZEILFELDER Pumpen - ASM DIMATEC Deutschland GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
About us
Show more All over the world, our customers trust in the high reliability of our products "Made in Germany"
These quality standards are based on more than 80 years of experience in mechanical and plant engineering. Maximum service life, due to solid and innovative design, modern manufacturing and quality assurance processes are the outstanding features of our pumps. All pump components are manufactured exclusively in Germany. Subcontracted parts are sourced from reputable German suppliers.
In addition to production, we also guarantee fast and reliable service. Customer-specific spare parts can be manufactured at any time.
These quality standards are based on more than 80 years of experience in mechanical and plant engineering. Maximum service life, due to solid and innovative design, modern manufacturing and quality assurance processes are the outstanding features of our pumps. All pump components are manufactured exclusively in Germany. Subcontracted parts are sourced from reputable German suppliers.
In addition to production, we also guarantee fast and reliable service. Customer-specific spare parts can be manufactured at any time.
ATEX Pumps - Manufacturers, Traders & Suppliers
Use our special service form and enter your search query for ATEX Pumps.
The IndustryStock team will quickly find the most suitable manufacturers, distributors or service providers for your search query for ATEX Pumps and quickly forward your message to these companies.
Are you looking for ATEX Pumps?
Are you looking for ATEX Pumps. IndustryStock's product and service search engine will not only help you find relevant results for ATEX Pumps but also related products and services. All contact information of listed ATEX Pumps manufacturers, traders, suppliers and dealers are freely available to all users.
ATEX Pumps - Synonyms spellings
Users who searched for ATEX Pumps also searched for:- ATEX Pump
How do you rate the information on this page?
6 Reviews 100%