15 companies for Oxide Ceramic Tools ✓ B2B manufacturers, distributors & suppliers from 3 countries ✓ With special service for fast information and prices ✓
Filter:
01662 Meißen, Germany Ceramaret Meissen GmbH Manufacturer ✓ Supplier ✓ Service provider ✓
- CERAMARET COMPONENTS FOR ANALYTICAL APPLICATIONS - components of various ultra-hard materials, chemically inert, and resistant to ...
- Shaping - Various shaping techniques
- Debinding and sintering of ceramics - uses high temperatures (up to 1600 -1800°) to heat the shaped and debinded parts over a lon...
68165 Mannheim, Germany CC ceramic components e. K. Manufacturer ✓ Trader ✓ Supplier ✓
- Ceramic tubes and rods are used in many technical equipments.The tubes and rods are made from materials C-799, C-530 and C-610.Our...
- Structural Ceramics - Ceramic parts offer many advantages in comparison with parts made of hardened or coated steels and tungsten ...
- Nozzles - Ceramics find widely application as nozzle materials. Two excellent characteristics - very high wear resistance and chem...
- Ceramic Insulators - Ceramic insulators are mainly produced from porcelain, steatite, cordierite or alumina. These materials exhib...
- Ceramics for Wire Processing - Ceramic parts are usually used in wire processing and galvanic wire plating as wire guides and pull...
- Ceramic Parts for Welding - Since years ceramic welding nozzles, pins, rollers for the high frequency welding of tubes, and cerami...
Description
Show more - Ceramic materials exhibit very high mechanical strength which is required for the application as components for machines and equipments.
- The hardness of advanced ceramic materials is above 9 on Moh´s Scale, and only diamond is harder (which rates 10 on Moh´s Scale). For this reason ceramic materials are excellent suitable for the production of parts with very high wear resistance e.g. for the paper-, textile- and wire industry.
- The low density of the ceramic material is advantageous in the design of rotating movable parts such as bearings, valves, and rotors.
- Ceramic materials are extremely heat resistant. The properties of metals can be significantly above 500 ° C after. Construction ceramics, however, can also be used above 1000 ° C. Ceramic components, for example in the metal industry in direct contact with molten metal (eg Abziehringen) is used.
- In contrast to metals ceramic materials react only insignificant with acids and bases. Therefore they are ideal for the application in chemical industry.
- Ceramic materials exhibit very high mechanical strength which is required for the application as components for machines and equipments.
- The hardness of advanced ceramic materials is above 9 on Moh´s Scale, and only diamond is harder (which rates 10 on Moh´s Scale). For this reason ceramic materials are excellent suitable for the production of parts with very high wear resistance e.g. for the paper-, textile- and wire industry.
- The low density of the ceramic material is advantageous in the design of rotating movable parts such as bearings, valves, and rotors.
- Ceramic materials are extremely heat resistant. The properties of metals can be significantly above 500 ° C after. Construction ceramics, however, can also be used above 1000 ° C. Ceramic components, for example in the metal industry in direct contact with molten metal (eg Abziehringen) is used.
- In contrast to metals ceramic materials react only insignificant with acids and bases. Therefore they are ideal for the application in chemical industry.
Moreover, ceramic materials are bioinert and are used as implants (e.g. hip joint endoprosthesis, tooth pins, malleus).
All ceramic materials (also non-oxide) exhibit excellent oxidation resistance at high temperatures.
About us
Show more FRIATEC AG is a specialist company for products made of non-corroding and wear-resistant materials. We develop innovative solutions for the global market in dialogue with our customers.
Innovations for more than 150 years
The company was founded in 1863 in Mannheim, Germany, as a brickyard and succeeded in developing its first pathbreaking innovation, chemical stoneware, in 1888. Numerous new developments followed. Among other things, the company started in the mid of the past century processing plastics and combined modern and traditional materials when producing chemical devices and facilities.
The following years were characterised by the expansion in the core business and the opening up of more and more new business segments. As Deutsche Steinzeug and later as Friedrichsfeld GmbH, the company, which has been operating under the name FRIATEC AG since 1993, continuously developed to become an internationally active, diversified company.
Spectrum of innovative solutions
As such, FRIATEC AG today offers a spectrum of innovative solutions for many industries, e.g. jointing technology for pipe systems, special pumps for aggressive, volatile or explosive media, but also ceramic components which are used in laboratory and electrical engineering but also in medical engineering. With its sophisticated solutions, FRIATEC AG is not only among the most well-known and well-established companies in the metropolitan region Rhine-Neckar but is also one of the global market leaders of its industry.
Partner of a powerful community
Since 2003, FRIATEC AG has been a member of the ALIAXIS group of companies with headquarters in Brussels, Belgium. ALIAXIS is the worldwide largest producer of plastic pipe systems for the construction industry, the industry and utilities.
Innovations for more than 150 years
The company was founded in 1863 in Mannheim, Germany, as a brickyard and succeeded in developing its first pathbreaking innovation, chemical stoneware, in 1888. Numerous new developments followed. Among other things, the company started in the mid of the past century processing plastics and combined modern and traditional materials when producing chemical devices and facilities.
The following years were characterised by the expansion in the core business and the opening up of more and more new business segments. As Deutsche Steinzeug and later as Friedrichsfeld GmbH, the company, which has been operating under the name FRIATEC AG since 1993, continuously developed to become an internationally active, diversified company.
Spectrum of innovative solutions
As such, FRIATEC AG today offers a spectrum of innovative solutions for many industries, e.g. jointing technology for pipe systems, special pumps for aggressive, volatile or explosive media, but also ceramic components which are used in laboratory and electrical engineering but also in medical engineering. With its sophisticated solutions, FRIATEC AG is not only among the most well-known and well-established companies in the metropolitan region Rhine-Neckar but is also one of the global market leaders of its industry.
Partner of a powerful community
Since 2003, FRIATEC AG has been a member of the ALIAXIS group of companies with headquarters in Brussels, Belgium. ALIAXIS is the worldwide largest producer of plastic pipe systems for the construction industry, the industry and utilities.
07629 Hermsdorf, Germany CERA SYSTEM Verschleißschutz GmbH Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Oxide Ceramic Tools | Tools | Tool Components
- Oxide Ceramic Tools | Tools | Diamond Tools
42861 Remscheid, Germany BERNSTEIN-Werkzeugfabrik Steinrücke GmbH Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Oxide Ceramic Tools | Tools | Shears
90562 Heroldsberg, Germany Ceramic Precision GmbH Manufacturer ✓ Trader ✓ Service provider ✓
Company Profile Send enquiry
- Oxide Ceramic Tools | Ceramic rolls | Ceramic Single Parts
- Oxide Ceramic Tools | Tools | Milling Tools
428034 Cheboxaryu, Russia Impromptu-contour the Research-and-production centre, Open Company Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Oxide Ceramic Tools | Diamond Tools | Diamond Cuting Plates
92676 Eschenbach i. d. Opf., Germany KERAFOL Keramische Folien GmbH & Co. KG Manufacturer ✓
Company Profile Send enquiry
- Oxide Ceramic Tools | Engineering Ceramics | Zirconia Ceramics
2943 Vendlincourt, Switzerland Louis Belet S.A Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
About us
Since 1948, Louis BELET SA, a family business of about 150 employees has manufactured cutting tools in solid carbide, ceramic or PCD. Our creative, technically, ecologically and socially performing has become a benchmark in the manufacture of profiled tools.
58093 Hagen, Germany Paul Wegner GmbH & Co. KG Maschinenmesserfabrik Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Oxide Ceramic Tools | Hot-pressing tool
- Oxide Ceramic Tools
KENNAMETAL DEUTSCHLAND GMBH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
About us
Kennametal is the premiere global provider of metalworking solutions using tungsten carbide inserts
- Oxide Ceramic Tools | Ceramic Heaters | Ceramic Industry
Oxide Ceramic Tools - Manufacturers, Traders & Suppliers
If you are short on time and need specific information or prices quickly, please use our special service form on the result's page.
Our IndustryStock team will find faster the best manufacturers, distributors or service providers for Oxide Ceramic Tools regarding your request and forward your mail message to the desired target groups.
Are you looking for Oxide Ceramic Tools?
Are you looking for Oxide Ceramic Tools. IndustryStock's product and service search engine will not only help you find relevant results for Oxide Ceramic Tools but also related products and services. All contact information of listed Oxide Ceramic Tools manufacturers, traders, suppliers and dealers are freely available to all users.
How do you rate the information on this page?
14 Reviews 98%