Electric Welding Fittings  Manufacturers, Traders, Suppliers

Materials:
Low pressure polyethylene (HDPE), PE 100, black
working pressure:
Electrofusion fittings from Unidelta can be connected to the following pipes:
SDR 26 (except diameter up to 125 mm)
SDR 17.6 and SDR 17  (except diameter up to 32 mm)
SDR 11 and SDR 7.4 (for all diameters)
These fittings are approved for a nominal pressure of 16 bar, unless other values are stated with the fittings. (see tables on our website).
For the connection (pipe system + fitting) the lower value of the pipe or fitting applies.Properties:
Unidelta electrofusion fittings are suitable for welding pipes and fittings made of PE 80 and PE 100. Electrical connections via terminals Ø 4.7 mm for fittings in PE80 and Ø 4.0 m for fittings in PE100. Welding voltage 39.5 V.
Each article is provided with a machine-readable barcode containing information on nominal diameter, melting time and cooling time.
Health regulations:
Unidelta - electrofusion fittings are made of materials suitable for the transport of drinking water and food liquids, in compliance with the laws and regulations in force in Italy and numerous other countries.They are suitable for the transport of drinking water, as they comply with the hygienic-health standards of Ministerial Decree No. 174 of 06.04.2004.
Admission:
DVGW DV-8601BP5567
DVGW DV-8606BP5568
DVGW DV- 8611BP5569
for gas and drinking water pipes and numerous other international approvals.