Low Pressure Flaps  Manufacturers, Traders, Suppliers

Overpressure and Vacuum Flap Type SDAK for highest silo safety through optimum pressure vacuum equalization
Areas of application
The overpressure and vacuum flap TYPE SDAK is a safety organ for silos which are filled pneumatically. Overpressure as well as vacuum - vacuum arises from exhaust fans or through rat hole collapses - can be equalized because of the combined design of the pressure flaps.
The optimum protection of the silo is guaranteed through the maintenance-free construction of the SDAK flaps.
Operation
The weighted, ball bearing supported flaps are opened through the outside, respectively inside pressure of the silos. In the unopened posiiton the rubber-coated flaps are dust tight. With a negative pressure of more than 5 mbar the negative pressure flap is opened through the outside pressure. Outside air can stream into the silo for pressure equalization. When overpressure occurs in the silo interior, the flap, with an adjustable weight, opens. The excessive pressure can be neutralized via the flap opening. The special design guarantees that the actuating pressure does not increase excessively and the outlet opening can respond fully.
Material/design
As construction material steel and various stainless steels are available.
Painting: Hammertone, silver grey
Standard sizes: 150 and 300 mm diameter
OPTION: As an option the flap can be fitted with proximity switches for signalizing. For use on silos and containers in enclosed halls the flap can be supplied with an exhaust air connection pipe so that the air escaping from the silo can be led away through pipelines.
Advantages

• Practically maintenance-free
• All bearings long life lubricated
• Outlet opening fully effective due to weighted flap discs
• Overpressure range steplessly adjustable