Car Park Coatings  Manufacturers, Traders, Suppliers

Parking area markings can be executed as floor markings of a parking area both indoors and outdoors. We come across a wide variety of floor coverings and decide on the use of a marking system primarily according to the soil conditions of the application areas and the optimum possibility of adhesion to the substrate. The regulations on environmental protection and pollution levels are also taken into account when creating a professional parking area marking system.

A parking area marking manufactured by Prolinetec using special high performance marking materials such as,

• 1-component, low-solvent, aromatic-free high-solid paint
• 2-component, low-solvent, aromatic-free high-solid paint on epoxy resin basis
• 2-component, low-solvent, aromatic-free high-solid paint based on polyurethane
• 3-component epoxy casting resin
• 2-component cold spray plastic
• 2-component cold plastic (thick-film material)
• others...

is particularly distinguished by its durability!

A parking area marking has essentially the following objective,
1.   Optimum use of area capacities; Increase of parking capacities
2.   improvement of the parking behaviour of road users; structured parking
3.      orientation aid for consumers through designated e.g. numbered and labelled parking areas
4.  increasing safety on company premises and in factory buildings by means of designated parking areas
    outside danger zones
5.  increasing the efficiency of logistics processes through designated parking areas, stopping and waiting areas,
  clear marking of loading zones for loading and unloading

• different colour design
• colour chip interspersion in different colours and sizes
• slip resistance or smooth surface
• chemical resistance against oils, acids etc.electrical conductivity - crack bridging - filling of fractures, holes etc.levelling of unevenness - mechanical load-bearing capacity - use in food processing areas- Working with fast reacting materials (up to 1 hour curing time)
• diffusion-open coatings
• execution of water protection systems according to § 19I WHG

- different colour design
- colour chip interspersion in different colours and sizes
- slip resistance or smooth surface
- chemical resistance against oils, acids etc.electrical conductivity - crack bridging - filling of fractures, holes etc.levelling of unevenness - mechanical load-bearing capacity - use in food processing areas- Working with fast reacting materials (up to 1 hour curing time)
- diffusion-open coatings
- execution of water protection systems according to § 19I WHG