Construction Winch  Manufacturers, Traders, Suppliers

haacon hebetechnik gmbh, headquartered in Freudenberg am Main, is a manufacturer of special solutions in lifting technology. Business areas are Industrial Lifting Technology, Commercial Vehicle Technology and Lifting Systems. From a technical point of view, haacon develops hoists whose power transmission is carried out by means of a spindle, gear rack or rope.
haacon concentrates on the business units General Lifting Technology, Commercial Vehicle Components and Lifting Systems in the B2B sector.
The commercial vehicle components are mainly used by manufacturers of trailers and trailers (semi-trailers, construction and special vehicles). Specialised "mobile" hoists for containers are mainly used in the logistics of the armed forces and emergency forces (e. g. Technical Relief Agency, fire brigade, police). They guarantee self-sufficient operation with little or no existing infrastructure.

We manufacture quantities from 1 to 1,000,000 pieces. The calculation is made according to your drawings or sketches, and we also make suggestions for the use of common materials.
Prototypes, one-offs, small, medium and large series.

This electric rope winch BW 160-L has been developed for special plant engineering, especially for wind power stations. Of course the rope winch BW-160 can also be used for construction and industrial sites.
The rope winch BW 160-L is characterized by its max. load capacity of 160 kg and the high hoisting speed, apart from its hook paths of up to 100 m.
These winches are available in two versions:
Version 1 - with fixing plate:
The rope winch can be screwed firmly to the base, e.g. on the floor or under the ceiling.
Version 2 - with pendulum suspension:
The rope winch can be attached to the jib booms or to a scaffold.

Due to the large customer base of the parent company and the good reputation, Wilfried Windhagen saw the opportunity to establish a second company pillar in inland navigation. The advantage of the mutual support of both companies with the same customer base was one of the decisive factors. Likewise the benefit in the increased order taking for both companies. He founded the company Steger & Windhagen GmbH Windenbau.
One could fall back in the first time to a master from the winch construction. To ensure that the company succession is also secured in time, son Andreas joined the young company in 2000. Andreas Windhagen is a trained measurement and control mechanic. In addition, an external design office is attached to the winch construction department. If necessary, an engineering office is called in. Anchor and mooring winches are classified and approved by Germanischer Lloyd.