35 companies for Acceptance Test ✓ B2B manufacturers, distributors & suppliers from 5 countries ✓ With special service for fast information and prices ✓
Filter:
57258 Freudenberg, Germany
DELA GmbH & Co. KG
Service provider ✓Description
Show more Acceptances & Test Certificates DELA flame-cut
parts and DELA flanges are available on request with a variety of acceptances and/or certificates.
As approx. 95% of our stock of steel plates is certified with certificate 3.1 / 3.2, for example, we can carry out acceptance tests:
- Germanischer Lloyd (GL)
- Lloyds Register (LRS)
- Bureau Veritas (BV)
- Det Norske Veritas (DNV)
- American Bureau of Shipping (ABS)
- TüV
on our flame-cut parts / flanges. For this purpose, the corresponding raw material is analysed by an external testing facility on the basis of a flame cut.
Furthermore, we are able to have almost any additional test carried out individually according to your specifications.
To name but a few examples:
- ultrasonic testing of flame-cut parts
- Weld bend test (ABV)
- Tensile test (flat tension, round tension, warm tension (WZV))
- Hardness test
- Chemical and physical examination
- Notched bar impact test (determination of the KBZ values ISO-V / DVM)
- Metallographic examination
- Corrosion investigation, simulating heat treatment, sample preparation etc..
03044 Cottbus, Germany
SHK SYSTEM PLAN GmbH
Manufacturer ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Systems Technology
06366 Köthen, Germany
VKK STANDARDKESSEL Köthen GmbH
Manufacturer ✓ Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Plant Examination
46485 Wesel, Germany
aas GmbH Armaturen Anlagen Service
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Valve test
88436 Eberhardzell-Füramoos, Germany
ALBRECHT Fördertechnik GmbH
Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Expert Examination | Crane Inspection
49824 Emlichheim, Germany
AMB Anlagen- und Maschinenbau GmbH
Manufacturer ✓ Trader ✓ Company Profile Send enquiry
- Acceptance Test
- Acceptance Test
33729 Bielefeld, Germany
Anlagenbau Bayer & LTA GmbH
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Supervision of Commission
68794 Oberhausen, Germany
autec Automation GmbH
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Plant Examination | Valve test
45889 Gelsenkirchen, Germany
BEPRO Blech und Profilstahl GmbH & Co.KG
Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Checking for Surface Cracks
28279 Bremen, Germany
BK Werkstofftechnik-Prüfstelle für Werkstoffe GmbH
Service provider ✓ Company Profile Send enquiry
- Acceptance Test | First Sample Examination | Procedure Qualification
8421 Dättlikon, Switzerland
calamia elektrokontrollen
Service provider ✓ Company Profile Send enquiry
- Acceptance Test
41460 Neuss, Germany
Dr. Sommer Werkstoffprüfservice GmbH
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Ultrasonic Testing | Positive Material Identification Test
- Acceptance Test | Rotor blade inspection
About us
Show more HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
47055 Duisburg, Germany
HWD - Haase Werkstoffprüfung Duisburg GmbH
Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Radiographic Test | Ultrasonic Testing
- Acceptance Test | Testing Service | Checking
- Acceptance Test | Corrosion Test | Materials Testing
07629 St Gangloff, Germany
Ingenieurbüro USB Umwelt - Systemtechnik & Behandlungslösungen
Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Tightness Testing
- Acceptance Test | Plant Examination | Quality Assessments
70565 Stuttgart-Vaihingen, Germany
Johann Maier GmbH & Co. KG
Manufacturer ✓ Trader ✓ Company Profile Send enquiry
- Acceptance Test
75210 Keltern, Germany
JORATEC GmbH
Manufacturer ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Acceptance Test | First Sample Examination | Function Testing
- Acceptance Test | Visual Inspection | Plant Examination
47445 Moers, Germany
PELZ GmbH & Co. KG Werkstoffprüfung - Qualitätssicherung
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Acceptance Test | Medical Products Tests | Plant Examination
- Acceptance Test | Supervision of Commission | Quantity Controls
- Acceptance Test | Main Inspection
32545 Bad Oeynhausen, Germany
SWK-Heizung- und Sanitärtechnik GmbH
Service provider ✓ Company Profile Send enquiry
- Acceptance Test
- Acceptance Test
Schwarz Apparate- und Behälterbau GmbH
Manufacturer ✓ Service provider ✓ Company Profile Send enquiry
About us
Show more SCHWARZ Apparate- und Behälterbau GmbH is a long-established medium-sized company with a solid craftsmanship tradition. Founded in 1921, for the past 30 years the company has specialized in the processing of stainless steel and special-purpose materials. Over this period, SCHWARZ has evolved to become an internationally acknowledged specialist in the fields of tank construction, plant engineering and equipment manufacture. company profile: - Sheet metal technology - Metal forming technology - Contract pickling - Large part machining - Robot welding - Testing technology - Mobile lathe services
CSE – CNC Service Engineer – Maschinenservice – Handwerksbetrieb
Service provider ✓ Company Profile Send enquiry
- REPAIR - Keep the downtime of your system as low as possible. through a professional repair.
- PROJECT IMPLEMENTATION AT SITE - Home office does not replace the project manager on site. We are there for you so that everything...
- RELOCATION - When relocating machines and entire production lines, a well-coordinated team is half the battle. Our team is in acti...
- REPAIR - If everything goes wrong, then the geometry has to be checked.
- MAINTENANCE - He who lubricates well, drives well.
Acceptance Test - Manufacturers, Traders & Suppliers
If you want to save time, please fill out our special service form for Acceptance Test.
Our specialized team will search for the right manufacturers, distributors or service providers for Acceptance Test and forward your inquiry directly to the target groups you are looking for.
Are you looking for Acceptance Test?
Are you looking for Acceptance Test. IndustryStock's product and service search engine will not only help you find relevant results for Acceptance Test but also related products and services. All contact information of listed Acceptance Test manufacturers, traders, suppliers and dealers are freely available to all users.
How do you rate the information on this page?
10 Reviews 90%