15 companies for Control Reports ✓ B2B manufacturers, distributors & suppliers from 2 countries ✓ With special service for fast information and prices ✓
Filter:
- Control Reports
- Control Reports | Testing Service | Accident Prevention Regulation Tests
70794 Filderstadt, Germany AS Strömungstechnik GmbH Manufacturer ✓ Service provider ✓
Company Profile Send enquiry
- Control Reports | First Sample Examination | Batch Testing
- Control Reports | Testing Service | First Sample Examination
40549 Düsseldorf, Germany GMA- Werkstoffprüfung GmbH Service provider ✓
Company Profile Send enquiry
- Control Reports | Testing Service | First Sample Examination
- Control Reports | First Sample Examination | Initial Sample Test Reports
1822BH Alkmaar, Netherlands HPFM B.V. Manufacturer ✓ Service provider ✓
Company Profile Send enquiry
About us
Show more HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
39576 Stendal, Germany ifu GmbH Stendal Privates Institut für Umweltüberwachung Service provider ✓
Company Profile Send enquiry
- Control Reports | Testing Service | Test Planning
33617 Bielefeld, Germany Ingenieur- und Sachverständigenbüro Heckendorf Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Control Reports
- Control Reports | Visual Inspection | Plant Examination
- Control Reports | First Sample Examination | Non-Destructive Component Testing
74219 Möckmühl, Germany SCHORRADT.COM Management Service Service provider ✓
Company Profile Send enquiry
- Control Reports | First Sample Examination
- Control Reports | First Sample Examination | Non-Destructive Component Testing
- Control Reports
- Control Reports | Nondestructive Testing | Procedure Qualification
Control Reports - Manufacturers, Traders & Suppliers
If you are short on time and need specific information or prices quickly, please use our special service form on the result's page.
We will then search for the right manufacturer, dealer or service provider for Control Reports and forward your request directly to these companies.
Are you looking for Control Reports?
Are you looking for Control Reports. IndustryStock's product and service search engine will not only help you find relevant results for Control Reports but also related products and services. All contact information of listed Control Reports manufacturers, traders, suppliers and dealers are freely available to all users.
How do you rate the information on this page?
13 Reviews 96%