Guide Rails  Manufacturers, Traders, Suppliers

Coatings made of Vulkollan have been successfully used in printing and folding technology for years. Whether as a wheel coating for a driving or pulling wheel or as a coating for guide rails - the advantages of a Vulkollan coating come into their own everywhere.
Due to our own engineering we are able to plan and manufacture customized components completely adapted to the application.

Manufacture of guide rails from silicon carbide SiC, SiSiC
Special properties:
High-temperature application, very good resistance to temperature changes; high thermal conductivity, extremely good oxidation resistance

Our processing techniques:

• cut-off grinding max. diameter 70mm; max. length 250mm
• Surface and groove grinding max. length 300mm
• CNC contour grinding max. 200 x 130mm
• cylindrical grinding max. diameter 150mm; max. length between centres 350mm
• Centerless grinding max. diameter 50mm
• CNC round profile grinding max. diameter 100mm
• Internal honing max. inner diameter 25mm
• Flat lapping; -Polishing does not mean optical polishing for sapphire!
• Round polishing min. diameter 5mm; max. diameter 30mm

These days, linear units are used in almost every single area of automation and machine engineering. From simple adjustments that may be seldom required right up to highly complex, highly precise and highly dynamic multi-axis systems. Every task is different. And every task requires a technically sophisticated and cost-effective solution.
Linear units with screw drive for simple through to highly dynamic adjustment tasks
Linear units with screw drive are used primarily when tasks involve comparatively high axial shearing forces and/or highest precision is required.
Linear units with timing belt for dynamic handling tasks
Linear actuators with timing belt drive are designed for high dynamics and large travels and are primarily used for Pick & Place applications, where high repeatability in short cycle times is key.
Linear units with rack and pinion for large stroke lengths
Linear units with rack and pinionare primarily used where loads are required to travel larger stroke lengths with high positioning accuracy and high dynamics.
Using our standard accessories, the linear actuators can be easily combined to create multi-axis systems. Our product consultants are happy to help you with the planning and design of a customised system solution.

double and single runner guide rail made of aluminium or steel

Double guide rails
Width 46 mm/
Height 29 mm/
Lengths of 1500 mm /2000 mm /2500 mm /3000 mm /3500 mm /4000 mm
Single track guide rails
Width 46 mm/
height 29 mm/
lengths of 1500 mm /2000 mm /2500 mm /3000 mm /3500 mm /4000 mm

Guide rails for sliding doors/
Cabinet systems, room dividers, passage doors

The IEF-Werner longitudinal guides are available as sliding or roller guide and characterised by high stiffness.

Typ M/V

Plastic-coated sliding guides

• friction value 0.06 - 0.1 at an area pressure of 0.5 N/mm
• speed up to 15 m/min
• at high transverse forces or transverse accelerations, vibrations and impacts
• for high-frequency, extremely short strokes
• V-rail of tool steel, hardened and ground
• M-rail coated with sliding lining, not hardened

Typ R+K

Cross-roller guide rails

• low friction coefficient (M = 0.003)
• speed of up to 50 m/min
• type R (roller guide) is used in large load and highest precision requirements
• type K (ball guide) is less dirt sensitive and suitable for easy movements and lower load requirements

Typ N/O

Needle roller guide rails

• low friction coefficient (M = 0.003)
• speed up to 50 m/min
• highest precision and stiffness
• nearly wear-free due to the "roller friction"
• for very high loads
• sealing required for protection against dirt effects

Guide rails calls linear guide ways , it has full ball type , roller type and miniature type.Linear guide ways are essential for high-precision linear motion in modern machinery. Choosing the right type depends on load, speed, accuracy, and environmental factors.

• C,H,P,SP precision
• Max length can be 6 meters
• Black chrome salty test over 200 hours

A guide rail is a precision mechanical component used to provide smooth and accurate linear motion in machinery and automation systems. They are widely used in CNC machines, robotics, 3D printers, medical equipment, and industrial automation.