34 companies for Partial Flow Filters ✓ B2B manufacturers, distributors & suppliers from 4 countries ✓ With special service for fast information and prices ✓
Filter:
53604 Bad Honnef, Germany
Filter Profitlich Maschinenbau GmbH
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓- Canister filters of the type 130 and 140 offer a cost-efficient alternative to our automatic self-cleaning filters from the aquaPR...
- Suction filters - For over fifty decades suction filters by Filter PROFItlich have been omnipresent internationally from steel ind...
- Mulit element filter - Reliable separation of water from fuels
- Completely automatic self-cleaning filter AP 317 - The AP713 is the entry level to our self-cleaning filters. The compact housing ...
- Completely automatic self-cleaning filter AP 3011 - The AP3011 is the entrance to the mid-range segment of our self-cleaning filte...
- Completely automatic self-cleaning filter AP 713 - The AP713 is the entry level to our self-cleaning filters. The compact housing ...
Description
Der Mehrelementfilter besteht aus einem Gehäuse, das mehrere Filterkerzen aufnehmen kann. Die Zylinderform der Filterkerzen verringert die Fließgeschwindigkeit.
Dadurch kann sich der Wasseranteil im Kraftstoff absetzen.
Im laufenden Betrieb erkennt ein kapazitiver Sensor das steigende Niveau des Wassers und löst beim Erreichen des Schwellwertes den Abflussmechanismus für das Wasser aus. Dieser Vorgang wiederholt sich so lange, bis die Filterkerzen entnommen und gereinigt werden müssen.
Den Zeitpunkt für die notwendige Reinigung zeigt ein Differenzdruckanzeiger an, der den Druck zwischen Ein- und Austritt misst.
Technical data
The automatic cleaning of the filter saves personnel-intensive service times.
- Housing: 1.4301, 1.4571 or St37 powder-coated
- Filtration during operation from 50 - 350 m³/h (depending on design and scaling)
- Pipe connections: DN25, DN50, DN80, DN100, DN125, DN150, DN200, DN250 Other pipe connections are possible on request.
- Finenesses: 2-500 µm
- Filter areas: 700 cm², 3000 cm², 5000 cm², 7000 cm²,
- required nominal pressure in the system: 1.5-2 bar
- Rinsing: with process water
- maximum operating pressure: 10 bar
- maximum temperature: 110 °C (powder-coated 70°C)
- Control: SIMATIC S7 1200 with touch panel or LOGO
- The filtration process is NOT interrupted.
Areas of application
Show more Sectors:
- Polymer industries
- Ink industries
- Food industries
- Automobile industries
- Laundry facilities
- Aluminium plants
- Pickling plants
- Paper industries
- Tire industries
- Communal and public services
- Chemical industries
67346 Speyer, Germany
DELTAFILTER Filtrationssysteme GmbH
Manufacturer ✓ Supplier ✓ Service provider ✓- Slot Tube Filters for the filtration of hydrous, viscous, high-viscous and pasty media
- Self-Cleaning Filters (Slot Tube Filters) DELTA-STRAIN 35-D/L with flow rate from 10 Liter/h up to 4000 Liter/h (in relation to cl...
- DELTA-SCF Cast-Series for filtration of hydrous, viscose and super viscose media
- DELTA-SKS in welded design with flow rate up to 430 m³/h (in relation to clean water) for filtration of fluids and gases
- DELTA-OV in cast design for the filtration of fluids and gases
- DELTA-OW as basket filters in cast design - dual filter for the filtration of fluids and gases
ISO
Show more ISO 9001: 2008
45739 Oer-Erkenschwick, Germany
bg edelstahl und kunststofftechnik für krankenhaus, industrie und wasserwirtschaft gmbh
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Partial Flow Filters | Off-line filter units
- Partial Flow Filters | Fluid Filter | Filter
63322 Rödermark, Germany
Schoneweg-Filtertechnik GmbH
Manufacturer ✓ Trader ✓ Company Profile Send enquiry
- Partial Flow Filters | Filtering Units | Belt Filters
- Partial Flow Filters | Filter Cleaning | Filter installation
33729 Bielefeld, Germany
Carl Werthenbach Konstruktionsteile GmbH & Co. KG
Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Partial Flow Filters | Filter Elements | Filter Systems
56584 Meinborn, Germany
Delta Technik Filtersysteme GmbH
Manufacturer ✓ Trader ✓ Company Profile Send enquiry
- Partial Flow Filters | Filtering Technique | Filtering Units
56070 Koblenz, Germany
Dipl. Ing. (FH) Neffgen GmbH
Manufacturer ✓ Trader ✓ Company Profile Send enquiry
- Partial Flow Filters | Air Filter
29664 Walsrode, Germany
Dipl.-Ing. Volker Beitz GmbH
Manufacturer ✓ Trader ✓ Service provider ✓ Company Profile Send enquiry
- Partial Flow Filters | Filter Systems | Hydraulic Filters
- Partial Flow Filters | Filter Systems | Hydraulic Filters
- Partial Flow Filters | Filtering Units | Candle Filters
31535 Neustadt am Rübenberge, Germany
Hartmut Schlottig Dichtungs- und Filtertechnik
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Partial Flow Filters | Filter | Filter Manufacturing
6114BZ Susteren, Netherlands
Holland Filter
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
About us
Show more Excellent in processing stainless steel
Since it was founded in 2005 - as a German sister company of the Dutch Horrichs Apparatenbouw BV and Holland Filter BV - UrMaTi Apparatebau GmbH has combined the knowledge and experience of these two traditional companies.
The products were originally used for process and waste water treatment, with extensive experience being gained particularly in the food industry.
Especially in this area, it is of great importance that the equipment is made of high-quality, corrosion-resistant materials. The decision to exclusively use stainless steel and other high-quality materials was then quickly made. Within the food industry, UrMaTi Apparatebau GmbH has acquired knowledge in the field of production of various apparatuses and internal transport systems.
Of course, these devices are also made of stainless steel. From the food industry we have been able to gain experience in the field of stainless steel industry as well as in other branches of industry.
The UrMaTi Apparatebau GmbH differs from other suppliers by a consistent, customer-oriented tailoring of their products.
If necessary, manufactured devices can be professionally assembled on site with the help of VCA-certified employees.
Due to the many possible uses of stainless steel and our knowledge of the diverse processing options, we are also represented in the field of interior and garden design.
With the help of this and other pages we hope to offer you a complete picture of our delivery programs and the many possibilities in this regard.
Since it was founded in 2005 - as a German sister company of the Dutch Horrichs Apparatenbouw BV and Holland Filter BV - UrMaTi Apparatebau GmbH has combined the knowledge and experience of these two traditional companies.
The products were originally used for process and waste water treatment, with extensive experience being gained particularly in the food industry.
Especially in this area, it is of great importance that the equipment is made of high-quality, corrosion-resistant materials. The decision to exclusively use stainless steel and other high-quality materials was then quickly made. Within the food industry, UrMaTi Apparatebau GmbH has acquired knowledge in the field of production of various apparatuses and internal transport systems.
Of course, these devices are also made of stainless steel. From the food industry we have been able to gain experience in the field of stainless steel industry as well as in other branches of industry.
The UrMaTi Apparatebau GmbH differs from other suppliers by a consistent, customer-oriented tailoring of their products.
If necessary, manufactured devices can be professionally assembled on site with the help of VCA-certified employees.
Due to the many possible uses of stainless steel and our knowledge of the diverse processing options, we are also represented in the field of interior and garden design.
With the help of this and other pages we hope to offer you a complete picture of our delivery programs and the many possibilities in this regard.
26389 Wilhelmshaven, Germany
HPKJ Hydraulik-Pneumatik-Kontor Jade GmbH
Manufacturer ✓ Trader ✓ Company Profile Send enquiry
- Partial Flow Filters | Filter Elements | Pressure Filters
66280 Sulzbach/Saar, Germany
HYDAC INTERNATIONAL GmbH
Manufacturer ✓ Trader ✓ Company Profile Send enquiry
- Partial Flow Filters | Filter Elements | Candle Filters
52525 Heinsberg, Germany
hydro-fact Matthias Maaßen
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Partial Flow Filters | Filtering Technique | Pressure Filters
- Partial Flow Filters | Filtering Technique | Filtering Units
68804 Altlussheim, Germany
INTERNORMEN TECHNOLOGY GmbH
Manufacturer ✓ Trader ✓ Company Profile Send enquiry
- Partial Flow Filters | Filtering Technique | Filter Elements
- Partial Flow Filters | Filtering Units | Filter Elements
21502 Geesthacht, Germany
MFT Mikrofiltertechnik GmbH
Manufacturer ✓ Service provider ✓ Company Profile Send enquiry
- Partial Flow Filters | Water Filters | Micro Filter
- Partial Flow Filters | Pressure Filters | Hydraulic Filters
58579 Schalksmühle, Germany
P&H Hydraulik GmbH
Trader ✓ Service provider ✓ Company Profile Send enquiry
- Partial Flow Filters | Filter Elements | Filter
- Partial Flow Filters | Filter Inserts | Metal Filter
63741 Aschaffenburg, Germany
Suffel Fördertechnik GmbH & Co. KG
Trader ✓ Company Profile Send enquiry
- Partial Flow Filters | Pressure Filters | Hydraulic Filters
- Partial Flow Filters
- Partial Flow Filters | Hydraulic Filters
58791 Werdohl, Germany
Walter Stauffenberg GmbH & Co. KG
Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓ Company Profile Send enquiry
- Partial Flow Filters | Filtering Technique | Filters
- Partial Flow Filters | Filtering Units
Description
These hydraulic oil off-line filter systems are designed for a wide range of industrial applications. The built-in pump makes them independent of the lubricant circuit;
Technical data
All off-line filter systems are available with hydraulic oil filter elements from 0.5 - 12µm filter fineness.
Areas of application
Show more For hydraulic and lubricating oil systems, such as plastic injection moulding machines, presses, shipbuilding, construction machinery and transformers, filter units up to a system capacity of 30,000 l are available from the standard range. For larger volumes, suitable filter units are available on request.
- Partial Flow Filters | Filtering Technique | Filtering Units
- Fluid Care and Purification Systems - Specially developed oil cleaning systems for oils andfluids. Highly efficient and applicatio...
- Offline Filters - Bypass filter unit, bypass oil filter for pressure and lubricating fluids, oil drying, fine filtration, depth fi...
Partial Flow Filters - Manufacturers, Traders & Suppliers
Use our special service form and enter your search query for Partial Flow Filters.
The IndustryStock team will quickly find the most suitable manufacturers, distributors or service providers for your search query for Partial Flow Filters and quickly forward your message to these companies.
Are you looking for Partial Flow Filters?
Are you looking for Partial Flow Filters. IndustryStock's product and service search engine will not only help you find relevant results for Partial Flow Filters but also related products and services. All contact information of listed Partial Flow Filters manufacturers, traders, suppliers and dealers are freely available to all users.
Partial Flow Filters - Synonyms spellings
Users who searched for Partial Flow Filters also searched for:- Partial Flow Filter
How do you rate the information on this page?
31 Reviews 100%