Multi-Spindle Turned Parts  Manufacturers, Traders, Suppliers

• improved diameter accuracy: the precise grinding leads to accurate holes
• improved positional accuracy: the sharp drill tip cuts softly
• significant increase in the service life of your drills due to uniform distribution of cutting forces
• significant reduction in feed forces thanks to precise, symmetrical pointing
• very fast and easy regrinding: results in a significant reduction in tool costs, e.g. due to higher availability=less downtime.e.g. higher availability=less capital tied up
• no more drilling tool bottlenecks
• significant reduction in drilling tool costs
• rapid amortization of the machine and the drilling tools - and many more advantages...

multi-indexing spindle lathe    Ø 4 – Ø 42

For the production of our turned parts we have multi-spindle and CNC turning machines at our disposal. Six and eight-spindle automatic machines are used to process stainless steels, free-cutting steels, brass, aluminium, quenched and tempered and case-hardened steels in a turning range from 6 to 50 mm.With the help of sorting machines a 100% inspection is possible. In the field of CNC turned parts we are specialists in the processing of long turned parts (up to 700 mm) with a diameter of 5 to 25 mm.Other CNC turned parts are available in small and medium series up to a diameter of 65 mm with all additional machining.

• Diameter:   5mm - 65 mm
• Long turned parts:   from 2 mm - 25 mm and 700 mm length

Backworking with driven tools. All rotating materials.
On six- and eight-spindle lathes on the makes
Schütte, Gildemeister and Mori-Say

• Turning range: 6mm - 50 mm
• Materials:  stainless steels, free-cutting steels, quenched and tempered and
• case-hardened steels as well as brass and aluminium

The focus is on a wide variety of milled parts, produced on
machining centres with plate changers. Material qualities include cast iron, die-cast aluminium, aluminium, brass and various steels. Provided casting blanks are machined in wage labour. In addition, products with tight tolerances and complex geometries are milled from profile or solid material.
Turned parts for fuel lines
For this technology area we not only manufacture special tube bending parts, but also the corresponding turned parts made of stainless steel, free-cutting steel, tempered steel, brass or aluminium.
The production is carried out for larger quantities on multi-spindle lathes and for small and medium series on CNC lathes.
The material is crack tested and meets the requirements of the automotive industry.Material:
Stainless steels, aluminium, brass, steel
Shaping:
Round, hexagonal or square
machining:  
Milling and cross drilling, produced on
Multi-spindle machines or CNC machines

CNC turning is a manufacturing technology that involves precision machining by means of a computer programme controlled lathe. It uses the relative motion between a rotating workpiece and a fixed tool to remove material to form the desired geometry. Compared to traditional manual turning, CNC turning offers a higher degree of automation, accuracy and repeatability, and is suitable for the mass production of complex parts

Key technical parameters in CNC turning machining
The reasonable setting of key parameters directly affects the machining effect:
Spindle speed (n)
Determine the appropriate cutting speed (vc) according to the diameter of the workpiece and tool material, and the calculation formula is generally:
Feed (f)
Depends on the tool, material and machining requirements, usually in mm/rev. A suitable feed ensures surface quality and tool life.
Depth of cut
The thickness of material removed per cut, which can be appropriately large for roughing and needs to be reduced for finishing to ensure dimensional accuracy and surface quality.
Backstroke (width of cut)
According to the rigidity of machine tools and cutting tools, a reasonable amount of backstroke can improve productivity, but too large may affect the surface quality.

Our various processing technology main production products include: equipment spare parts, product shells, mechanical parts, chassis cabinet shells and so on. These products are widely used in intelligent security, 3C, automotive, medical, smart grid monitoring and other fields.