Roughing Lathes for Rolls  Manufacturers, Traders, Suppliers

Roller roughing lathes for large workpieces with a high material removal rate Roughing processes are machining processes that generate a particularly large chip volume. They are used when it comes to approaching the final contour of the workpiece as quickly as possible. The tools used have large teeth and a large cutting depth. They produce surfaces that are comparatively rough. In most cases, the workpiece must be reworked in a further manufacturing step. The roughing process is often used in the turning process. Turning is characterized by a rotating workpiece or semi-finished product that is guided along a stationary tool. When turning is carried out manually, it is called a lathe. If the turning process is automated, the machine is called a lathe. A roll roughing lathe is therefore a lathe that is used in the roughing process and uses rolls as tools. A roller roughing lathe is a non-automated machine with which workpieces can be machined using the roughing process. These machine tools are usually equipped with additional devices to prevent the workpieces from being pushed through or vibrated. roll roughing lathes, roller lathes and lathes are used for particularly large workpieces requiring high material removal. Despite the very high weights, the rigid design of these machines enables a quiet and low-vibration machining process. Typical representatives of these machines have a drive power of 210 kW and can accommodate workpieces weighing up to 30 t. image source: Company NILES-SIMMONS Industrieanlagen GmbH