28 companies for Cold Forming Moulds ✓ B2B manufacturers, distributors & suppliers from 4 countries ✓ With special service for fast information and prices ✓
- HEICO-FORM® Solid and semi-solid parts - The manufacture of solid and semi-hollow parts is based on customer-specific requirements...
- HEICO-FORM® Sleeves / Hollow parts - Sleeves are manufactured in different head and shank geometries. Thanks to economical product...
- HEICO-FORM® Knurled parts - Machined parts can be manufactured with a radial or an axial knurl. These knurls are applied in the co...
- HEICO-FORM® Threaded parts - Internal or external threads can be manufactured both mechanically and by machine-cutting in finishin...
- HEICO-FORM® Step pins - Step pins are commonly used in hinge technology as moving link elements. In assemblies they act as spacers...
- HEICO-FORM® Ball pins - We manufacture ball pins with different part geometries (such as for example hexagon head or recessed driv...
HEICO-FORM Cold Forged Parts
Quality for the highest demands
In close collaboration with the customer, solution-oriented process stages are developed and optimally adapted to the customer's individual requirements.
By this process, the HEICO group is able to replace castings and turned parts with cold-formed components despite close tolerances. This offers advantages by optimising material properties through cold working and reducing material usage.
- HEICO-FORM Solid and semi-solid parts
- HEICO-FORM Sleeves / Hollow parts
- HEICO-FORM Threaded parts
- HEICO-FORM Knurled parts
- HEICO-FORM Step pins
- HEICO-FORM Ball pins
- HEICO-FORM Metal plastic parts
- HEICO-FORM Special parts
- Klöpperböden according to DIN 28011
- Plate bottom - Manufacture of dished ends according to customer-specific requirements
- Convex bottom For tank construction - in single and double-walled design
- Concave disc - Convex discs for tank construction
- Diffuser floor - Diffuser bottom Manufactured according to customer requirements
- Flat bottom - Production of flat bottoms according to customer requirements
Production of heads and bottoms through cold forming process. 100% made in Germany.
Slawinski heads and bottoms are produced in a cold forming process. At our production site in Siegen-Weidenau, we produce heads and bottoms with diameters of up to 5,400 mm and wall thicknesses of 30 mm, through dishing and flanging forming processes.
At our Bad Laasphe factory, heads and bottoms with diameters of up to 3,100 mm and wall thicknesses of 12 mm are shaped using the spinning forming process. All heads and bottoms can be subjected to heat treatment after cold forming in accordance with the production code.
- Cold Forming Moulds | Folding | Sheet Metal Stampings
- Cold Forming Moulds | Forming | Cold Pressed Parts
- Cold Forming Moulds | Extruded Parts | Aluminum Pressed Parts
- Cold Forming Moulds | Extruded Parts | Cold Extruded Parts
- Cold Forming Moulds | Aluminum Pressed Parts | Pressed Parts
- Cold Forming Moulds | Aluminum Pressed Parts | Cold Pressed Parts
- Cold Forming Moulds | Extruded Parts | Aluminum Pressed Parts
We manufacture technical extrusion products from aluminum, in some cases also from copper. Impact extrusion, also known as cold forming or cold extrusion: the clever alternative to conventional manufacturing processes.
Ready-to-install extruded components including surface treatment or ageing T6, as well as support in the optimal design of extruded components: Aluminum housings, buckets, pinions and many other aluminum components.
We are also your highly qualified partner for the design and manufacture of extrusion and post-processing tools (trimming, punching, bending) and CNC clamping devices.
- Cold Forming Moulds | Cold Pressed Parts | Cold Forming Parts
- Cold Forming Moulds | Extruded Parts | Aluminum Pressed Parts
- Cold Forming Moulds | Extruded Parts | Cold Extruded Parts
- Cold Forming Moulds according to customer requirements
- Cold Forming Moulds
- Cold Forming Moulds | Extruded Parts | Aluminum Pressed Parts
- Cold Forming Moulds | Forming | Aluminum Pressed Parts
- Cold Forming Moulds | Extruded Parts | Metal Forming
- Cold Forming Moulds | Extruded Parts | Aluminum Pressed Parts
- Cold Forming Moulds | Forming | Extruded Parts
- Cold Forming Moulds | Extruded Parts | Cold Extruded Parts
- Cold Forming Moulds | Forming | Extruded Parts
- Cold Forming Moulds | Extruded Parts | Sheet Metal Stampings
- Cold Forming Moulds | Extruded Parts
produced from various steels , e.g. cold / hot rolled steels, electro-galvanizes steel, hot dip galvanized steel
aluminium, stainless steel, etc. according to customer request.
We have an extensive machinery park, which includes: 50 eccentric presses with a capacity from 25T to 320T Two pressing lines with a feeding arm:7 x 160T and 6 x 160T 200T hydraulic press
We also offer secondary assembly of stampings and other components according to customer needs, including:
Pressing of nuts, bolts, pins and parts Thread cutting using Rascamat flexible arm taps and table single and multi-spindle taps
Spot welding
Laser welding
CFMSK is certified by IATF16949, ISO9001, ISO14001 and ISO45001
- Cold Forming Moulds | Cold Pressed Parts | Moulded Plastic Products
- Stamping, embossing and engraving parts from Gladtfeld - We produce stamped parts, bent parts, signs, tags, identification tags, c...
- Embossing and molding with individual options - A wide variety of embossed signs and identification marks in small or large series...
- Cold Forming Moulds
50 years of experience enabled us to set up a unique and excellent combination of cost-saving production methods and our acquired expertise works to the benefit of our customers. Since 1965, we are forming custom and standardized products by cold extrusion. Our procedures require significantly less raw material than the usual methods and are therefore more cost effective. Careful processing of the formed parts assures top quality, compliance with technical specifications and accurate fit.
We place utmost importance on comprehensive consultations with our customers. This ensures that we use our technological expertise to the greatest benefit of our customers.
In the course of a forming operation, we demonstrate for example how the finished product will look. In some instances, we will perform the application development including the cost calculation and production planning.
Our assortment of products includes locking screws, turned workpieces and cold extruded parts, which we manufacture either according to customer specifications or as standardized parts. We are also able to process a broad range of different materials, such as aluminum, steel and brass among other materials. We use the following production methods to manufacture parts for our customers:
Turning
- single-spindle automated lathe up to Ø 60 mm
- multi-spindle automated lathe up to Ø 51 mm
Cold Extrusion
- 4 and 5-step cold forming (planned: 6-step forming)
- press capacity up to 3,000 kN
- maximum shaft length = 160 mm
- maximum wire diameter = 26 mm
Product Finishing by External Partners
- galvanic surface coating
- pigment coating
- heat treatment/softening treatment
- micro-encapsulation
Montage
- metal seal rings/gaskets
- elastomer seal rings/gaskets
- magnets
Post Processing/Finishing of
- cold extruded parts
- turned parts
- forging blanks (forging billets)
Surface Preparation (Cleaning) Technology
- innovative cleaning equipment to improve the technical cleanliness of the parts
Your partner for heads, closures and special pressed parts
Afflerbach Bödenpresserei GmbH & Co KG is a manufacturing medium-sized company in the metalworking industry. With around 230 employees at our sites in Puderbach and Dernbach, we process black plates, stainless steels and claddings using hot and cold forming processes.
Afflerbach specializes in the manufacture of heads, closures and special pressed parts and is the world's leading supplier of single-piece, thick-walled hot-formed heads of the highest quality. We are the central contact for manufacturers of pressure vessels with high technical requirements, series producers and manufacturers of closures as well as special pressed parts.
Our customers have included satisfied boiler, vessel, apparatus, piping and plant manufacturers from all over the world for decades.
Cold Forming Moulds - Manufacturers, Traders & Suppliers
If you are short on time and need specific information or prices quickly, please use our special service form on the result's page.
Our IndustryStock team will find faster the best manufacturers, distributors or service providers for Cold Forming Moulds regarding your request and forward your mail message to the desired target groups.
Are you looking for Cold Forming Moulds?
Are you looking for Cold Forming Moulds. IndustryStock's product and service search engine will not only help you find relevant results for Cold Forming Moulds but also related products and services. All contact information of listed Cold Forming Moulds manufacturers, traders, suppliers and dealers are freely available to all users.
Cold Forming Moulds - Synonyms spellings
Users who searched for Cold Forming Moulds also searched for:- Cold Forming Molds
How do you rate the information on this page?