Circulating Pumps  Manufacturers, Traders, Suppliers

Our range includes various centrifugal pump types in staged sizes and
material versions. As a manufacturer of special pumps we supply pump
solutions which are adapted exactly to the application at hand - EDUR
application customization. For contaminated, clean and problematic
liquids and liquid-gas mixtures. German engineering and fabrication –
each pump is individually performance tested and receives an inspection
record. All this for a more reliable investment

Automotive, brewery technology, chemical plants, extrusion technology,
filter plants, beverage industry, tempering plants, industrial cooling,
boiler systems, food industry, metal cleaning, new energies, paper
industry, reservoir systems, environmental technology, process
engineering, sugar industry

Vmat FT fine filter volume circulation system

stationary FT FF 1 up to 1,500 kW and FT FF 4 from 1.000 kW

mobile      FT FF 1 from 10 kW-1.500 kW

After all, the dirt from the water!

The Vmat fine filter system reliably filters solids from heating water. The filter elements used have different filter properties. While sludge separators always represent a poor compromise between pressure loss and separation efficiency, the Vmat FT can concentrate fully on filtration &.lt;/p>

           without pressure loss in the heating system.

The problem is in the heating circuit water:
During filling, oxygen inevitably also enters the system. Corrosion sets in - rust sludge is the result.
This silting up leads to extensive disturbances:

• encrusted energy generators and heat exchangers
• reduced performance
• higher wear and tear on pumps and valves
• higher environmental pollution due to higher energy supply with decreasing performance
• Deposit in the pipeline net-which causes bottlenecks

Only 1mm layer of dirt on the production area means at least 3 % worse heat transfer.
The Vmat FT can be retrofitted without great effort. It works in bypass and is connected in the return flow of the heating system. This ensures uninterrupted operation, e.g. when changing the filter.
The recommended initial filter unit is 15µm, means in the new unpolluted state the largest particle passing the filter element has a max. diameter of 15µm.
Depending on the degree of soiling, a layer of dirt builds up, this causes a refinement of the filtration, so that dirt with grain sizes below 1µm is filtered out. If the filter element is clogged (max. differential pressure of 1.5 bar) the unit switches off. The filter will now be cleaned or replaced.

Industry: Extreme temperatures, high pressures, abrasive, corrosive and solids-laden media: KSB products are equipped to meet virtually any requirement. Applications: o Chemicals o Oil/gas o General industry o Flue gas desulphurisation o Hot water/heat transfer media o Food/pharmaceutical/biotechnology Energy: KSB is the global leader in power station pumps and valves. The product range meets all requirements in the main and secondary circuits of power plants. Applications: o Conventional power plants o Combined cycle power plants o Nuclear power plants Water: KSB products supply households, industrial plants and agriculture with clean or process water. Applications: o Water extraction including seawater desalination o Water treatment o Water transport Waste water: KSB pumps help to transport and treat waste water. Pumps in dry and wet installation, mixers and stirrers are used in sewage treatment processes. Applications: o Waste water treatment plants in industry and municipalities o Waste water pumping stations Building services: KSB equips industrial and residential buildings, office buildings, exhibition halls and airports with pumps, valves and compact systems. Applications: o Water supply o Drainage o Heating/air conditioning/ventilation o Pressure boosting Mining: Whether phosphate rock, oil sand, copper ores or gravel, the special pumps of our subsidiary GIW reliably handle up to 80 percent solids content. Applications: o Mining o Oil sand industry o Suction dredgers